该词条未找到_海词词典

您要查找的是不是：

variable design point method 变设计点法
design point method 验算点法
Taking the engineering example, the design method and design point of bulkhead gate with muti-nodal floating pontoon are introduced. 摘要结合工程实例介绍了多节浮箱式检修闸门的设计方法及设计要点。
In this paper,a part modeling method based on variable design and group technology(GT)in CAD is proposed. This method has been applied to the development of a practical CAD system, and a satisfactory result has been achieved. 讨论了在CAD技术中基于变型设计和成组技术的零件建模方法，并将这种方法应用于一个实际的零件CAD系统的设计中，取得了满意的效果。
From a design point of view, this is the correct way to do it. 从设计观点来看,这是这样做的正确方法。
Create an action to save the variable designs. 建立一个行动，以拯救变量设计。
A dummy type is defined, to hold the entry point method Main. 定义了一个虚拟类型以容纳入口点方法Main。
The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form. 重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。
In Visual Basic 2005, the Point method no longer exists. 在Visual Basic 2005中,Point方法不再存在。
An interior point method is used to solve the multi-objective OPF. 并用与系统规模关系不大的内点法对模型进行求解。
Conclusions The point to point method of quality control can pl... 结论“点对点”的“专项质控”方法对护理质量管理有持续改进的作用。
In the paper, the design of dewatering and drainage by pipe well point method for deep foundation pit excavation of a metro station in Shenzhen city is presented. 主要介绍了深圳地铁×车站深基坑开挖所采用的管井井点降水方案的设计情况。
It discusses the characteristic of rapid variable product design and PDM technology, describes the procedure of rapid product model with integrated PDM, shows the detail about the application of integrated CAx and rapid variable design strategy. 探讨了快速变型技术和PDM应用系统的特点,分析了在PDM系统集成环境下的快速变型设计过程,论证了以PDM系统作为数据平台,集成各CAx应用系统,采用快速变型设计技术是进行快速产品设计的最佳实施策略。
From a design point of view, it helps to concentrate on the role of XML documents, rather than on their structure. 从设计的观点来看,这有助于把焦点放在XML文件的角色上,而不是放在它们的结构上。
This paper discusses the vault and the ribbed vault storages with rib from the design point of view. 本文主要从设计的角度就拱顶及带肋拱顶油罐大型化的问题进行探讨。
Resulted model was further used to analyze geometries' effects on stability and performance at design point. 并分析了几何尺寸对压缩机稳定性和设计点效率的影响。
Design of a Flat-field EDG Wavelength Demultiplexer Using a Two Stigmatic Points Method[J]. 引用该论文文泓桥;何赛灵;盛钟延;石志敏;何建军.
The parameter selected, channel, tube system and shell design scheme, design trait and design point of 330 MW high pressure heater were introduced. 摘要介绍了330MW机组高压加热器的参数选取、水室、管系及外壳的设计方案、设计特点及要点。
The principal advantages of waveriders are the high lift-to-drag ratio at the design point and the uniform flowfield on the undersurface. 乘波构形的特点是高升阻比,下表面上的流动是均匀的,因此是推进系统/机身一体化设计的理想候选构形。
Thirdly, the model of Optimal Power Flow (OPF) with UPFC is established, and solved by interior point method. 然后,建立了计及UPFC的最优潮流数学模型,并用内点法进行求解。