您要查找的是不是：
- With active carbon and silicon carbide as sintering aids,the boron carbide ceramic materials were prepared by using vacuum hot pressing sintering. 以活性炭和碳化硅为烧结助剂,采用真空热压工艺,制备了碳化硼陶瓷材料。
- Design and Manufacture of a Vacuum Hot Press Sintering Furnace 真空热压烧结炉的研制
- Keywords synthesized in-situation;vacuum hot press sintering;molybdenum-disilicide composite; 原位合成;真空热压烧结;二硅化钼;复合材料;
- vacuum hot pressing sintering 真空热压
- Characteristics and advantages of vacuum hot pressing by using method of sintering dia-mond bit are described briefly in this paper, i. e. 本文阐述了真空热压烧结金刚石钻头的特点、优越性，即排杂、脱氧、脱气、促进金属粉末合金化、降低金刚石强度的热力损失、钻头内在质量明显改善；
- vacuum hot pressed sintering 真空热压烧结
- Application of Vacuum Hot Pressing Method in Sintering Diamond Bit 真空热压烧结金刚石钻头的应用
- The effect of hot pressing sintering temperature,pressure and time on its properties are investigated by means of orthogonality rejection and variance analysis. 采用正交设计和方差分析的方法研究了热压烧结温度、压力、时间对该砂轮性能的影响。
- The results show that it is feasible to use ceramics as friction element material instead of hard alloy, or to fix the ceramics on the bit by hot press sintering process. 试验结果表明,用陶瓷代替硬质合金作为热机碎岩钻头的摩擦材料是可行的,利用热压烧结工艺可以将陶瓷固定在钻头上。
- Abstract Aluminum matrix composite reinforced with continuous boron fibers (MMC) which was produced by an atmospheric plasma spraying (APS) process and vacuum hot pressing (VHP) was investigated. 摘要 采用大气等离子喷涂法制备连续硼纤维增强铝基复合材料预制片，结合真空热压扩散焊制备了B/Al复合材料。
- The results show that it is feasible to use ceramics as friction element material instead of hard alloy , or to fix the ceramics on the bit by hot press sintering process. 试验结果表明,用陶瓷代替硬质合金作为热机碎岩钻头的摩擦材料是可行的,利用热压烧结工艺可以将陶瓷固定在钻头上。
- This thesis reports some results on the hot press sintering of nano-composite WC-Co powder, which is prepared by spray pyrogenation &continuous deoxidization and carbonization process. 本课题采用热压烧结技术对以喷雾热解-连续还原碳化法制备的纳米复合WC-Co粉末进行了热压烧结研究。
- Chen Wenge,Ding Bingjun,Zhang Hui.Nanocrystal W-Cu electrical contact material by mechanical alloying and hot pressed sintering[J].The Chinese Journal of Nonferrous Metals,2002,12(6):1224-1228. [6]陈文革;丁秉钧;张晖.;机械合金化制备的纳米晶W-Cu电触头材料[J]
- Keywords nanocrystalline tungsten;vacuum hot pressing;microhardness; 纳米金属钨;真空热压;显微硬度;
- specimen current heating dynamic hot press sintering 电流直加热动态热压烧结
- Keywords silicon carbide particles/copper composites;hot pressing sintering;densification; 碳化硅颗粒/铜复合材料;热压烧结;致密化;
- vacuum hot pressing 真空热压
- Keywords MoSi_2;spark plasma sintering;hot press sintering;microstruvture;mechanical property; 二硅化钼;放电等离子烧结;热压烧结;显微组织;力学性能;
- hot pressing sintering 热压烧结
- hot pressing sintering process 热压烧结
