您要查找的是不是：
- Quenching crack deep and long, straight fracture, fracture surface without oxide color. 淬火裂纹深而细长，断口平直，破断面无氧化色。
- The quenching crack was mainly caused by the metallurgic defects all well as well as the unreasonable structural design and improper machinework. 结果表明，钢板存在的治金缺陷以及不合理的机加工和结构设计，是导致其淬火开裂的根本原因。
- The intercritical hardening process for the camshaft thrust piece was proposed by analyzing the reason of quenching crack. 对凸轮轴止推片产生淬火裂纹的原因进行了分析,提出了亚温淬火工艺,并在实践中应用,消除了淬火裂纹。
- The method of lapping repair for quenching crack inside the cold die steel has been studied in this paper in order to prevente the crack. 针对这一情况，提出了对已形成淬火裂纹的冷作模具进行搭桥修复的新思想，并进行了试验研究。
- Any cylinder designed to the requirements for specification 3AAX and found to have a quenching crack must be rejected and may not be requalified. 按照3AAX规范设计的钢瓶，发现淬火裂纹后，必须报废，不可以再使用。
- Such crack belongs to quenching crack, which is caused by too high temperature for carburization,coarse grains and bad original materials. 渗碳温度过高、晶粒粗大、材质不良是产生淬火裂纹的原因。
- The method of lapping repair for quenching crack inside the cold die steel has been studied in this paper in order to prevente the crack.The experimental research has been done. 针对这一情况，提出了对已形成淬火裂纹的冷作模具进行搭桥修复的新思想，并进行了试验研究。
- No danger of quenching crack. 无淬裂危险。
- You'll crack up if you go on working so hard. 你继续这样拚命干下去，身体会吃不消的。
- Several factors leading to quenching crack of dovetail cutters were analyzed.The heat treatment process was designed to prevent dovetail cutters from cracking. 分析了导致鸽尾铣刀产生淬火裂纹的因素,设计了能有效预防鸽尾铣刀淬裂的热处理工艺。
- She got up at the crack of dawn. 天刚亮她便起床了。
- There are many scrapped products or raw materials caused by the quench cracks of metal workpieces. 金属材料工件因淬火裂纹造成产品或原材料报废的实例很多。
- Chemical analysis and metallograph examination were used to analyze the quenching cracking of shaft gear. 运用化学分析、金相检验等方法,对45钢制轴齿轮产生的裂纹进行检测分析。
- How much do all these figures stack up to? 这些数字的总和是多少？
- Swimming is the best way to tone up your body. 游泳是健体强身的最好方法。
- I believe he has started reading up anthropology. 我相信他已开始攻读人类学。
- It is now our aim to set up a factory. 我们现在的目的是创办一座工厂。
- In addition, quenching cracks in the release valve arise from the stress concentration at incisions of valve intracavity. 而淬火裂纹系因泄放阀体内腔刀痕的应力集中而产生的。
- I need a piece of string to tie this parcel up. 我需要一根细绳把这包裹扎起来。
- She drives carefully up the rocky lane. 她驾车小心地从这条很多石头的小路上驶过去。
