您要查找的是不是:
- Chinese medicine spray drying, granulating and coating. 粉体、颗粒、丸的薄膜、肠溶、缓控释包衣。
- Aim To define the best process for spray drying of Yanyan granules. 目的确定咽炎颗粒喷雾干燥的最佳工艺。
- The types and reasons for wall sticking during spray drying were analysed. 摘要对喷雾干燥粘壁的类型和原因进行了分析。
- Three methods are adopted to prepare the toner including ball milling,spray drying and pneumatic jet milling. 试验了三种制备墨粉的方法,即球磨机球磨破碎法、喷雾干燥法和气流粉碎机粉碎法;
- AIM To select excipient of preparation technology of compound folium sennae spray drying powder. 目的选择复方番泻叶喷雾干燥粉末微丸成型工艺的赋形剂。
- The results show that the quantity of malt dextrin is 70% and CMC is 1.5%,the effects of spray drying are fairly good. 试验结果表明,当麦芽糊精加入量为70%25,CMC加入量为1.5%25时,喷粉效果好。
- Amorphous midecamycin acetate(1) was obtained by spray drying a solution of 1 and ethylcellulose in chloroform. 以乙基纤维素为稳定剂,三氯甲烷为溶媒,用喷雾干燥法制备较稳定的非晶形醋酸麦迪霉素。
- The spray drying is the technology widest used in the liquid technology shaping and in the drying industry. 喷雾干燥是液体工艺形成和干燥工业中应用最广泛的工艺。
- Alumina is a common carrier for catalysts.A microspheric alumina can be prepared by spray drying process. 氧化铝是催化剂常用载体,利用喷雾干燥方法可制得适合流化床用的微球氧化铝。
- Several systems for spray drying of prednisolone solution and suspensions have been studied. 摘要对不同的泼尼松龙体系(包括溶液和混悬液)的喷雾干燥过程进行了考察。
- Objective: To select the optimum conditions for the spray drying of Xueshuankang Capsules. 目的:选择血栓康胶囊喷雾干燥的最佳工艺条件。
- The result can offer the proper inlet temperature and kinematical viscosity for spray drying. 结果:运动黏度对喷雾干燥的影响大于相对密度;
- The spray drying method was used to prepare the Volatile oil microencapsules,such as oil of Herba Agastachis. 本文采用喷雾干燥法制备藿香油等挥发油微囊,考察了油、水、胶三者比例对挥发油保留率的影响。
- Energy conservation is important for unit operation consuming large energy such as spray drying. 喷雾干燥是能耗较大的单元操作,节能工作十分重要。
- A spray drying process of preparation of diisporopyl malonate with super acid as catalyst was studied. 介绍了一种以喷雾干燥脱水,以超强酸催化酯化合成丙二酸二异丙酯的方法。
- Cinnaldehyde was microencapsulated with the method of spray drying by using the Gum Acacia and Maltodextrin as the principal wall materials. 研究了以阿拉伯树胶和麦芽糊精为壁材,喷雾干燥法制备微胶囊化肉桂醛的工艺条件。
- Key technology in the processing, such as heat blanching, enzyme treatment, spray drying, superfine grinding was studied. 本文确立了天然南瓜粉生产工艺,对漂烫、酶解、喷雾干燥、超微粉碎等关键技术进行了研究。
- Objective To explore the prescription factor on Ophiopogon japonicus saponin enteric microsphere by spray drying technique. 摘要目的探索喷雾干燥技术制备麦冬皂苷肠溶微球的处方因素对微球成型性的影响。
- It is made from high-quality low temperature soybean, with the process of getting rid of soluble sugar, isolating, purifying, spray drying etc. 它采用高质量低温大豆,通过除去可溶性糖分、分离、净化和喷雾干化加工而成。
- The spray drying is an important umt operation,but it is a common phenomenon that spray drops adhere to the inner wall of the tower,thus causing scars. 喷雾干燥是一个重要的单元操作,雾滴黏附于塔内壁引起结疤是普遍现象。