该词条未找到_海词词典

您要查找的是不是：

simulated process parameter 模拟过程参数
Orthogonal experiment based injection mold CAE simulation process parameter setting 基于正交试验的注塑成型工艺参数CAE模拟设定
Be familiar with molding machine and their process parameter settings. 熟悉注塑工艺和注塑设备的性能。
The effect of the process parameter on the preparation of the carbon nanotube film is discussed. 详细讨论了制备工艺参数变化对碳纳米管生长的影响。
The structure and process parameters of DSE yarns are analyzed. 分析了DSE纱线的结构和加工性能。
The heat treater has full laboratory capability to perform product monitoring and process parameter control auditing functions. 热处理方有足够的实验能力来执行产品监督和过程参数控制审计功能。
Gelatinize of process parameters are shown in table 2. 涂胶的不关工艺参数见表2。
According to the structure and process parameters of the tundish in a specific steel plant the hot metal flowing process and the retention conditions are mathematically simulated. 根据某厂连铸中间包的结构和操作工艺参数,采用数学模拟的方法研究了连铸中间包的钢水流动过程以及停留状况。
The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized. 在通氨的同时,将乙醇直接滴入工作炉内,实现气体软氮化,并对工艺进行了优选。
The process of power spinning for taper has been simulated and an estimation model of finite element post-process has been established according to predicting process parameters. 根据预测的工艺参数对锥形件强力旋压过程进行模拟，建立有限元模拟后处理评价模型。
The production equipment and process parameter for producing heavy denier and mult-filament polyester fiber are described. 介绍了粗旦、多孔数涤纶长丝的生产设备和工艺参数。
The thesis simulated the production of warping phenomenon in the U-bending process and investigated how to obtain improvement from the change of process parameters. 本文模拟在U型弯曲成形过程翘曲现象的产生并研究如何从改变不同模具及制程参数所获得之改善方式。
According to character of papermill mid-stage wastewater, pre-treated by hydrolysis and acidification, perfect process parameter is determined. 针对碱法草浆废水的特点,以水解酸化对其进行预处理,同时确定出预处理的最佳处理参数。
With the same laser processing paramete... 理论值与实测值符合很好。
Processing parameter setup by digital operation panel and memory mode. 数位化操作面板及记忆模组式的加工参数设定功能。
Trip distribution is another of the major aspects of the transportation simulation process. 行程分布是交通模拟程序里另一个主要方面。
A low-voltage power VDMOS is designed using virtual fabrication.A virtual device is simulated and the structure of device is settled through the optimizing of process parameters. 摘要采用虚拟制造方法设计了低压功率VDMOS器件，并对其进行结构参数、物理参数和电性能参数的模拟测试，确定了器件的物理结构。
The paper introduces the technological procedure and principle of instant rice production and offers the process parameter. 介绍了方便米饭生产的工艺流程及其原理，同时给出了各工段的工艺参数。
The dynamic analysis is done on the output from the simulation process based on the output logs or the events. 动态的分析是由基于输出日志或事件的模拟流程的输出过程来完成的。
The numerical simulation process of wavefront reconstruction with this shear interferometer is given. 最后用数值方法模拟了波前恢复过程。