该词条未找到_海词词典

您要查找的是不是：

soap-free silicone acrylic emulsion 无皂硅丙乳液
Comparison of the performances was made on this emulsion and other acrylic emulsions. Several excellent characteristics of the siliconized acrylic emulsion were analyzed. 进行了硅丙乳液与其它乳液的性能对比,分析了硅丙乳液的一些优异特性。
silicone acrylic emulsion 硅丙乳液
Silicone modified acrylic emulsion with excellent water, contamination and weather resistance, is an ideal binder for super-weatherable exterior wall coatings. 有机硅改性丙烯酸酯乳液具有卓越的耐水性、耐沾污性和耐候性,是制备超耐候性建筑外墙涂料的理想基料。
It has shown that silicone modified acrylic emulsion and pure acrylic emulsion with core-shell structure provide better weathering property,high PVC emulsion coatings are easy for discoloration... 结果表明:硅丙乳液和核壳型纯丙乳液具有较好的耐候性,高PVC乳胶漆容易变色,炭黑和氧化铁系色浆适合于配制浅色外墙乳胶漆,有机颜料色浆应用在外墙时应谨慎。
This paper introduces the study of styrene acrylic emulsion on surface sizing. 对苯乙烯/烯酸乳液在表面施胶中的作用进行了研究。
Silicone acrylate emulsion 硅丙乳液
Its main components: acrylic emulsion and defoaming agents and additives. 主给身分：丙烯酸乳液、消泡剂及助剂。
The reactive surfactant, sodium allyl hydroxyalkyl sulphonate(SAHS) was applied as modifying agent to polymerize elastic acrylic emulsion. 使用烯丙基羟烷基磺酸钠(SAHS)作为可聚合乳化剂,改性合成了弹性丙烯酸酯乳液。
A kind of acrylic emulsion was synthesized by pre?emulsified and half?continued emulsion polymerizing. A composition emulsion adhesive was 3?8 N/25mm. 采用预乳化半连续乳液聚合工艺,合成了一种丙烯酸酯类乳液,将其与自制水性松香乳液、VAE乳液复配制成复合乳液胶粘剂,用于包装和印刷行业的纸塑复合,剥离强度达到了3 8N/25mm。
The influences of silicon on organosilicon-modified acrylate emulsion were also discussed. 论述了硅对有机硅改性丙烯酸酯乳液的影响。
A acrylic emulsion dilative fireretardant paint has been developed, which features decorative as well as fire-retardant performance. 研制了既能防火阻燃、又具有装饰效果的新型丙烯酸乳胶膨胀型防火涂料。
Compared with acrylic emulsion polymerized with soap, emulsion polymerized without soap showed better compactibility with inorganic powders. 对比有皂聚合的丙烯酸乳液,无皂聚合的乳液与无机粉料体现出更好的相容性。
A kind of new cathodic electrophoretic coating was synthesized with acrylic emulsion modified by PVB (polyvinyl butyral). 以PVB(聚乙烯醇缩丁醛)改性丙烯酸乳液,合成了一种新的阴极电泳涂料。
The acrylic emulsion latex with stability and high conversion was synthesized by pre-emulsified and hemi-continuous emulsion polymerization. 确定了最佳合成工艺和配方，研究了诸因素对聚合反应及产品粘结强度、耐低温性能的影响规律，所得主要结论如下：（1）采用预乳化工艺、半连续的乳液聚合方法，合成了转化率较高的，性能稳定的丙烯酸酯乳液。
Acrylic emulsion is a promising selection because of its properties of elasticity, weather endurance and waterproofness. 丙烯酸酯乳液由于弹性可调性好、涂膜耐侯性和耐水性优异而成为首选。
Modified Acrylic emulsion for anticorrosive primers and matt or semigloss top-coats with good adhesion on metals and galvanized substrates. 改性丙烯酸乳液，用于金属、镀锌材质防腐底漆、哑光、半哑面漆，具有良好的附着力。
Incorporation of the prepared nano-particles into the styrene acrylic emulsion coatings will improve the coatings performance greatly. 将制备的纳米粒子加到苯丙涂料中,可使涂料的各项性能得到很大提高。
A new type of acrylic emulsion pressure - sensitive adhesive was prepared by using hydroxypropyl aery-late and N - methylol acrylamide as cross - liking monomers. 选用丙烯酸羟丙酯和N-羟甲基丙烯酰胺作为交联单体参与丙烯酸酯共聚,研制出一种新型的丙烯酸乳液压敏胶。
CTE-501 is a hydrophobically modified alkali soluble acrylic emulsion designed for modifying the viscosity and water retention properties of pigment coating formulations. CTE-501是改性的憎水、碱溶性丙烯酸类乳液，其目的是为了改进含颜料涂料配方的粘度及保水性。