您要查找的是不是：
- scavenge oil pump 废油泵
- scavenge oil pump body 换油泵体
- Taian Wuzhou Oil Pump And Oil Nozzle Co., Ltd. 泰安五洲油泵油嘴有限公司。
- Excavation for fuel oil pump house is in progress. 燃油泵房开挖工作正在进行。
- Activates the auxiliary oil pump. 辅助油泵激活按钮。
- Open the stop valve for the cooling water and make scavenge oil cooling in order to oil temperature becomes too high. 打开冷却水截止阀,对回油进行冷却,以防止油温过高。
- Stop the running of one oil pump of the electric motor. 停止电机一油泵的运转。
- We are looking for supplier of oil pump PARTS brand name CTR. 我们需要求购汽车机油泵，请联系我们。
- The pressure of lube oil pump increases very slowly. 机油泵压力增长很慢。
- Automatic oil pump and fault alarm syster, dygnosis and instructions. 自动注油,自动故障报警、诊断,指导处理。
- BEIJING CITY GUOXING AUTOMOBILE OIL PUMP FACTORY MANUFACTURING CO., LTD. 北京市国兴汽车油泵制造有限公司。
- Exhibits: Forging, brake disc, DrivingShaft, engine, oil pump, Steering Gear. 展品锻件、制动系统、传动轴、水泵、机油泵、转向器。
- Main products: oil tank, oil tube, oiler support, oil pump, oil applying wheel etc. 产品主要结构：油箱、油管、安装支架、油泵总成及涂油轮等组成。
- This paper proposes a design project of the dynamoelectric accelerograph control system of X-aeroengine oil pump modulator. 提出了一种某航空发动机油泵调节器电动油门控制系统的设计方案。
- The rubber formulation of oil pump bushing was designed by orthogonal testing method design for on NBR(N - 41 ). 选用丁腈橡胶（N-41）为基础胶，利用正交试验法设计出抽油泵衬套橡胶配方。
- The oil pump should be close to the oil tank as possible as it can, the suction height should be no more than 500mm. 油泵应尽量接近油箱,吸入高度不得大于500毫米。
- The oil pump should be firmly fixed; the inlet and outlet pipe should be fastened without loose. 油泵应牢固地加以固定,进出口管接头,不得有松动现象。
- Supply diesel oil to engine, to ensure the reliability of the engine. To fit inline type high pressure oil pump. 向发动机供柴油,以确保发动机可靠工作。与直列式高压油泵匹配。
- Pre-heating oven.Oil heating for bronzing plate, constant temperature auto control, oil pump circulation. 烫金版油加热,恒温自动控制,油泵循环。
- Turn “Light Oil Pump Run” switcher to “ON” position and make sure the ignition burner is lit. 将“轻油泵运行”转换开关转到“运行”，并确认点火燃烧器已点着。
