您要查找的是不是:
- Recycled PET/PA66 composites were prepared through reactive extrusion technology with OZ as the compatilizer. 采用OZ作为反应相容剂,通过反应挤出制备了回收聚对苯二甲酸乙二酯(PET)/聚酰胺66(PA66)复合材料。
- Preparation of SIS triblock copolymer with reactive extrusion technology 反应挤出合成SIS三嵌段共聚物的研究
- Progress in Application of Reactive Extrusion Technology in Bulk Polymerization for Polymers 反应挤出技术在高聚物本体聚合中的应用进展
- reactive extrusion technology 反应挤出
- Direct extrusion is one of the developing tendencies of extrusion technology. 直接挤出是挤出技术的发展方向之一。
- Grafted material of itaconic acid onto low-density polyethylene (LDPE) was prepared by melt reactive extrusion. 利用反应挤出技术制备了低密度聚乙烯(LDPE)/亚甲基丁二酸接枝物。
- Results show that the reactive speed of catalysed system can meet the retention time of reactive extrusion based on twin-screw extruder. 结果表明,催化体系的聚合反应速度完全满足双螺杆挤出机反应挤出停留时间的要求。
- New methods of preparing novel polymer and modifying polymer are grafting of polymer by reactive extrusion and in the Haake torque rheometer. 综述了利用哈克转矩流变仪及采用反应挤出法制备接枝聚合物的特点及接枝体系的选择。
- The melt gragting of maleic anhydride (MAH) onto polyolefin elastomer (POE) was carried out via reactive extrusion by twin-screw extruder. 用同向双螺杆挤出机进行热塑性聚烯烃弹性体(POE)熔融接枝马来酸酐(MAH)的反应,考察了MAH单体、引发剂用量和加工条件对接枝率的影响。
- THE PRESENT SITUATION AND ANALYSIS OF EXTRUSION TECHNOLOGY FOR BRAZING FILLER METALS IN THE WORLD. 国外硬钎料挤压技术的现状与分析。
- It is considered that reactive extrusion technique is an economical and feasible way of producing esterized starch in contras... 与传统的湿法和干法工艺相比,反应挤出法是酯化淀粉生产中一种经济可行的方法。
- A is the first publisher to dedicate a special interest magazine about extrusion technology for this market. 率先献上了挤压工艺专业杂志,成为这一市场的首家出版商。
- The technology of wheat bran extrusion technology was studied to increase its content of soluble dietary fiber. 研究了以小麦麸皮为原料,经挤压改性使其可溶物含量增加的生产工艺。
- The principle and peculiarity of reactive extrusion were reviewed . The structure of reactive extruder, and development of reactive extrusion were also introduced. 介绍了反应挤出的原理和特点、反应挤出机的结构、反应挤出的应用以及反应挤出的发展方向。
- Recently, foreign extrusion technology aimed at the development trend of positive development of reverse extruder. 最近又瞄准国外挤压技术的发展趋势,积极研发反向挤压机。
- The melt grafting of maleic anhydride (MAH) onto ethylene propylene diene mischpolymere (EPDM) was carried out via reactive extrusion by twin screw extruder. 用同向双螺杆挤出机,对三元乙丙共聚物(EPDM)进行熔融接枝马来酸酐(MAH),考察了单体、引发剂(DCP)用量和加工条件对接枝率的影响。
- This paper aimed at the applied research of extrusion technology in the dietary fibre and nutritional health grain foods to exposition mostly. 针对膳食纤维、谷物营养保健食品加工挤压技术的应用研究表明,挤压可以稳定和改性膳食纤维。
- In recent years aimed at foreign extrusion technology and the development trend of positive development of reverse extruder. 近年来又瞄准国外挤压技术的发展趋势,积极研发反向挤压机。
- Briefly introduced the assembly of the continuous curing line for EPDM water-proof sheet and main technical Parameters and the application of L-head extrusion technology. 对三元乙丙橡胶防水片材挤出连续硫化生产线的构成、主要技术参数及L型机头挤出技术的应用作了简要介绍。
- The numerical simulation of reactive extrusion processes for polymerization is helpful towards control of chemical reaction,material structure,and prediction of limiting process conditions. 聚合反应挤出过程的数值模拟有助于实现化学反应控制、材料结构控制与极限加工条件的预测。