该词条未找到_海词词典

您要查找的是不是：

The velocity field in blown film die was simulated by FEM method. 用有限元法对吹膜机头内熔体流动的速度场进行了模拟。
The experiment shows that solvent volatileness could form porous membrane with smooth surface. 同时成膜方法制约着可以形成的膜孔径的大小和分布。
Ju Yixi, thin poly, plastic film blown film crew with a reasonable design. 聚乙稀，聚稀，塑料薄膜吹膜机组具有合理的设计。
The PVDF-HFP(poly vinylidenefluoride-hexafluoro propylene) porous membrane for Li ion polymer battery was prepared by a phase inversion process. 采用倒相法制备PVDF-HFP(聚偏氟乙烯-六氟丙烯)多孔薄膜。
This is a porous membrane because of the reason, to maintain cutting oil to reduce friction heat, to prevent wire into the attack surface effect. 此皮膜因是多孔质的原故，能保持住切削油减少摩擦热，有防止丝攻表面融着的效果。
In this paper, theories of porous membrane fouling and cleaning were explored, and a series of experiments were especially done to clean CaSO4 scale in porous membrane. 本文就对多孔膜的污染问题进行了理论探讨，并针对多孔膜中硫酸钙垢的清洗作了一系列实验。
Can be used for blown film, clips, but also as a production line Masterbatch cable under-plant use. 可用于吹膜、压板、还可以作为生产电缆线母粒厂的下家使用。
Principle of blown film die with spiral spreader and factors affecting its properties are introduced. 介绍了螺旋芯棒机头的工作原理以及影响其性能的因素。
LLDPE-based and contains highly dispersive NanoPrecipitated Calcium Carbonat (NPCC) fillers.It applies well in LDPE and HDPE blown film. 以低密度聚乙烯为材,微米碳酸钙为填充物,经充份分散加工所制成高浓度含量之产品,适用于LDPE、HDPE的吹膜加工应用。
An appropriate selection of electrode material and optimization of preparation technical skills of electrode porous membrane are very important to improve electric performances of AMTEC. 选择合适的电极材料,优化电极多孔薄膜的制备工艺,对改善AMTEC的电特性将是十分重要的。
LLDPE-based and contains highly dispersive NanoPrecipitated Calcium Carbonat（NPCC）fillers.It applies well in LDPE and HDPE blown film. 以低密度聚乙烯为材,微米碳酸钙为填充物,经充份分散加工所制成高浓度含量之产品,适用于LDPE、HDPE的吹膜加工应用。
The final structure of porous membrane is decided by the diffusion speed of supercritical CO2 fluid inside the polymer and the plasticizing effect of polymer caused by supercritical CO2 fluid. 论述了CO2对聚合物增塑作用的大小和CO2在聚合物材料中向外扩散的速率是最终影响膜孔结构形态的两个基本因素；
The addition of slip agent could improve the antiblocking properties of PVA blown film, being of great benefit to the post processing of the film. 开口剂的加人可以很好地改善薄膜的滑爽性。
In this study, MF membrane was introduced to the dust removal process, ePTFE（expanded poly-tetra-fluoric-ethylene）porous membrane has very slippery surface, with micro-size pores. 膨体聚四氟乙烯（ePTFE）微孔薄膜具有表面光滑，不结露，微孔径小（<2微米）等特点，本文选用ePTFE薄膜作为覆膜滤料，研究了该滤料的过滤性能。
The fisheye problems appeared in the post processing of linear low density polyethylene(LLDPE) blown film were discussed. 探讨了吹膜后期加工过程中出现的晶点问题,指出在催化剂制备过程中,应当严格控制反应物中的杂质含量;
PVDF/HFP-based porous membranes were covered on one side with silica particles that were brought to the surface of the membrane by the casting solvent during preparation. HFP多孔薄膜的其中一面覆盖著许多可能在成膜过程中因溶剂挥发而被带至表面的二氧化矽（silica）粒子，另一面则较少。
The blown film process makes it possible to produce films with specially customized properties. 吹塑膜生产工艺能生产出具有特别定制性能的薄膜。
PVDF porous membranes were prepared by thermally induced phase separation(TIPS) method of PVDF blended with DBP. 以聚偏氟乙烯(PVDF)和邻苯二甲酸二丁酯(DBP)作为膜材料和稀释剂,采用热致相分离法(TIPS法)制备了聚偏氟乙烯(PVDF)微孔膜。
Ethylene perchloride porous membrane 过氯乙烯多孔膜
Exhibits: Rubber(plastics) mixer, mixing mill, calender line, plastics blown film line, multiplayer co-extrusion blown film line (for heavy package and medical film) and plastics twin-screw compounding system etc. 展出内容：橡胶（塑料）密炼机、开炼机、压延生产线，塑料吹塑薄膜机组，多层共挤包装膜（重包装、医用膜）机组，双螺杆塑料挤出造粒生产线等。