该词条未找到_海词词典

您要查找的是不是：

optimal shape control 形状最优控制
There is no shape control in Visual Basic 2005. 在Visual Basic 2005中没有形状控件。
Shape control was added at design time. 控件是在设计时添加的。
In fact, SFR is heavily related to shape control. 自由规程轧制问题本质上是板形控制问题。
The Shape control in Visual Basic 6.0 Has no equivalent in Visual Basic 2005. Visual Basic 6.;0中的Shape控件在Visual Basic 2005中没有等效项。
Shape control is control profile and control flatness of strip or sheet. 板形控制是控制带材或是薄钢板横断面形状和纵向平直度的。
Cenedese A,Cunsele D. Scoop optimal shape in a Gas Ultracentrifuge [A]. Mechanical, March 1980. 张存镇.;离心分离理论[M]
The crew module borrows the familiar conical shape with a curved heatshield, which has proven to be the optimal shape for missions returning from the moon. 船员舱沿用了熟悉的带弧形挡热板的圆锥形状,这已被证明是探月返回时的最佳形状。
In the Visual Basic 6.0 Example, the Shape control is used; it assumes that a Line control was added at design time. 在Visual Basic 6.;0示例中使用Shape控件;其中假定Line控件是在设计时添加的。
This paper introduces CVC technique briefly that improves the basic principle of shape control. 介绍了CVC技术改善板形的基本原理。
Finally, the optimized shapes of lugs are proposed. 并提出了耳片形状的优化方法。
The effect and ability of the shape control instrument on the aluminum foil rolling mill in Alcoa(Shanghai)Co. Ltd. 分析了美铝(上海)铝业有限公司铝箔轧机板形控制手段的作用和能力。
At the same time, the mechanisms of size and shape control of metal nanoparticles are also summarized. 并总结了液相制备纳米金属粉的粒度和形貌控制作用机理。
The optimal shaping condition was set as follows:48.8%EGB,45%MCC,6%PVPP,0.2%silica gel. 处方组成为48.;8%25银杏叶提取物;45%25微晶纤维素;6%25交联聚维酮;0
The application of VCR improves shape control, giving better strip flatness, higher capacity for thin strip and better self maintenance of roll contours. 现场应用表明：改善了轧机板形调控性能，提高了带钢板形质量，增强了薄规格品种轧制能力，支承辊辊形自保持性较好。
RESULTS The optimal shaping condition was set as follows:48.8%EGB,45%MCC,6%PVPP,0.2%silica gel. 结果处方组成为48.;8%25银杏叶提取物;45%25微晶纤维素;6%25交联聚维酮;0
The present article introduces the application and practical effect of new CVC shape control model in hot rolling mill plant of Bao Steel. 介绍了宝钢热轧厂新CVC板型控制模型的应用及实际控制效果
In order to carry out SFR, elimination or well-distribution of work roll wear and creation of special shape control technologies are necessary. 为了实现自由规程轧制需减少磨损量、均匀化磨损分布或开发特殊的板形控制技术。
The article introduced the system of shape control, the establishment of control model, the control and adjustment of shape of HC cold rolling mill. 介绍了HC冷轧机板形控制系统、控制模型的建立及板形的控制和调节。