您要查找的是不是:
- impact load identification 冲击载荷识别
- Damage form is slips shear damage under impact load. 该材料在冲击下的破坏是滑移剪切破坏;
- Load identification research is vital to dynamic analysis and applications. 摘要荷载的辨识问题研究在动力分析和应用中具有重要意义。
- This paper presents a method determining analytical and process bandwidth in load identification. 本文研究在载荷识别中确定载荷的分析处理频带宽度的方法。
- In back analysis,the unreasonable modality is not only helpless for the load identification,but also interferefering... 然而在工程实行中,常常是很难对作用于结构的外载荷作直接测量和计算。
- In order to solve this problem, a dynamic load identification method about guyed mast should be established. 要解决这个问题,必须建立作用在桅杆结构上的动力风荷载的识别方法。
- This article discusses the dynamic computation of the closed cylindrical shell under impact load. 本文讨论闭合圆柱形壳体在冲击荷载作用下的动力计算.
- The ability of a diamond to withstand an impact load is typically referred to as diamond impact strength. 能否经受冲击负荷的钻石通常称为金刚石冲击强度。
- In this paper, load identification is studied in the time domain by combining the coupling method and the precise time integration method. 该文通过耦合方法与精细时程积分法的结合,对载荷辨识问题进行时域分析和推导。
- Crack initiation and propagation process in A356 aluminium alloy under impact load have been investigated. 研究了A356铝合金在冲击载荷作用下的裂纹萌生及其扩展过程。
- A dynamic load identification method is proposed for proportional damping systems based on high precision direct integration scheme. 对比例阻尼系统给出了基于精细逐步积分法的动态载荷识别方法。
- When mass ratio is constant, the peak value of impact load is proportional to the velocity. 在质量比不变的情况下,冲击荷载的峰值与初速度成正比;
- It is more attractive but not deeply discussed to talk about the reliability design of HSMS under impact load. 而在冲击载荷下弹簧质量系统的可靠性设计更是备受关注但讨论不够深入的课题。
- Because of the special arrangement, the blade can continuously thrash water during running, which reduces the impact load raise the operation stability. 由于叶片在主轴上的特殊排列,使得运行时叶片连续击水,减少了冲击载荷,提高了运行稳定性。
- On the other hand, as an instant impact load with controllable energy, dynamic compaction is a good test in-situ for the study of soil dynamics. 另外,作为一种能量可控的瞬态冲击荷载,强夯施工可以作为一个可控的土动力学原位试验。
- The highly precise direct integration scheme is used for solving modal dynamic differential equation of the structure and a dynamic load identification method by the modal respondence is proposed. 采用无条件稳定的精细逐步积分法求解结构的模态动力学微分方程,构造了通过结构的模态响应直接反求荷载列阵的迭代算法。
- By solving the dynamic buckling equation numerically, the effect of pre-load, impact yate and geometrical imperfection on critical impact load is studied. 文中考查了静力预载荷、冲击载荷速度以及初始几何缺陷对临界冲击载荷的影响。
- In the FEM simulation of the loading identification process, the bending moment maintains a constant amplitude, hut its direction is alterable. 在有限元仿真计算中,弯矩载荷的大小保持不变,但方向可调。
- Under the 2.0J impact load, the wear resistance of the composite containing 40%(vol.%) TiC is 1.3 times of Hadfield steel . 在2.;0焦耳的冲击载荷下,含TiC体积分数为40%25的复合材料的耐磨性是高锰钢1
- Unwanted steering kickback and vibrations are reduced with the addition of a solenoid valve that acts like a damper when there is a harsh impact load. 不受欢迎的指导回扣和振动降低,增加了电磁阀行为象一个阻尼器时,有一个严厉的冲击载荷。