您要查找的是不是：
- According to filament winding process, a composite flywheel rotor laminated winding process was approved. 其次，结合复合材料缠绕成型工艺，进行了复合材料储能飞轮分层结构的工艺设计。
- Position clutch cover over disc and on flywheel. 把离合器盖板放在离合器片和飞轮上。
- Check/correct flywheel alignment. 检查/修正飞轮校正。
- It has locknut fasten rotor to a spindle. 配有防松螺母固定转子与中心轴。
- A Novel UPS Based on Flywheel Energ. 基于飞轮储能技术的UPS系统。
- The protection of flywheel trip to be confirmed. 飞车保护提交。
- The flywheel is made from carbon steel. 飞轮由碳钢制成。
- The rotor cataracts water over the top of the machines. 回转轴将水从机器顶上注入。
- Install the brake rotor shield to the knuckle. 向转向节上安装煞车分火头护罩。
- Wider nozzle at draw frame or rotor. 并条或转杯喇叭口宽。
- Numerical Simulation of Rotor Flow in Hover. 悬停下旋翼流的数值模拟。
- A design method of flywheel rotor consisting of composite rim and metal hub is given considering connection between rotor and driving machine. 考虑到转子与驱动机构的连接,给出了一种金属轮毂加复合材料轮缘结构飞轮转子的设计方法。
- Fiber length to rotor diameter not near to unity. 纤维长度与纺杯直径不一致（协调）。
- Inspect distributor cap,rotor,and ignition wires. 用电脑翻译成：检查经销商盖帽、电动子,和燃烧导线。
- All rotor halves that we want on one drawing! 所有半转轴我们想在一个图纸上。
- Use hammer and brass drift to tap ring gear onto the flywheel. 用锤子和黄铜冲销轻轻敲打环齿轮进入飞轮。
- It is best to allow the rotor to rotate freely. 最好让转子自由旋转。
- Facing on flywheel side of disc torn, gouged, or worn. 离合器片在飞轮侧的表面撕裂、擦伤或磨损。
- Spark found between rotor and stator. 发现转子与定子之间有火花。
- Replace rotor; adjust the clearance. 更换转子，调整间隙。
