您要查找的是不是：
- eutectic preform 共晶合金盘料
- Condensate will leavemarks on the preform surface. 露水会遗留痕迹在瓶坯的表面上。
- A eutectic mixture,solution,or alloy. 低共熔混合物，易熔质易熔的混合物，溶体或合金
- Condensate will leave marks on the preform surface. 露水会遗留痕迹在瓶坯的表面上。
- A eutectic is atx=0.147 and T=221.28K. 转熔点位置在 (0 .;72 8;2 80
- Large eutectic ledeburite is not found. 合金层中的碳化物细小、均匀、弥散,无粗大的共晶莱氏体组织。
- A eutectic mixture, solution, or alloy. 低共熔混合物，易熔质易熔的混合物，溶体或合金
- Precise preform loading system in order to minimize failure rate. 高可靠性的进坯、上坯、出坯系统、使吹瓶机故障率降到最低。
- Mass Edit Mode allows you to preform mass deletion of posts. 默认情况下，评论表格显示最近二十篇文章。
- Major in PET preform mould,cap mould and blow mould. 专业生产瓶坯模具;瓶盖模具和吹瓶模具.
- Eutectic carbide in network made white iron was britten. 共晶碳化物呈连续网状分布是白口铁脆性的根源。
- The eutectic temperature of banana pulp was measured. 利用电阻法测得了香蕉浆的共晶点温度。
- The tackified fiber preform technology is important in LCM process. 纤维预成型技术是LCM工艺的一个重要环节。
- In some cases, manufacturers are unaware of the eutectic point. 在一些案例里，生产商不知道产品的共晶点。
- That's a eutectic mixture. 那是低共熔混合物。
- Min. 2-3 years sales experience in preform injection machines is preferred. 至少有2-3年的销售经验,在瓶胚注塑机方面有销售经验的优先考虑。
- There will be a sprue at the bottom of the preform of no more than 5 mm. 瓶坯底会留有不超过5mm长的水口
- Most preform moulds are rectangular and are longer than they are wide. 大多数的瓶坯模具呈长形，就是长度比阔度大。
- The main area of initiation is pinetree carbide and eutectic carbide. 裂纹萌生地主要为：枝晶碳化物和复式碳化物。
- Cooling time dominates cycle time in thick-wall moulding like preform moulding. 属厚壁注塑的瓶坯，冷却时间支配着周期时间。
