您要查找的是不是：
- double flow lines operation 双流水线作业
- flow line operation 流水线作业
- Figure 1: Continuous flow lines in highly stressed crotch area. 图1：高应力弯钩区域的连续流径线。
- Command line operation of Disk Defragmenter is not supported. 不支持磁盘碎片整理程序的命令行操作。
- It is the world's first commercial maglev line operation. 是世界第一条商业运营的磁悬浮专线。
- The high lately international square B bestrides for a day, the big way south of mansion postpones line, adjacent become the all international double flow airport and train south station. 高新国际广场B座雄踞天府大道南延线，毗邻成都国际双流机场和火车南站。
- Seam runs must be checked for flowing lines. 必须检查线缝,确保线条流畅。
- Little flow resistance and corrosiveness of media.It has double flow direction and is widely applied. 液体阻力小,介质冲蚀小,具有双流向适用范围广。
- Double flow stablized coal burner renovation mechanism applied in YG-65/3.82-M1 boiler is described in the paper. 叙述了YG65/3.;82－M1型锅炉采用双向稳燃煤粉燃烧器技术改造机理。
- This air line operates five main. 这家经营五条主干线和二十条支线。
- In charge of managing production line operator. 负责管理生产线和操作员.
- Currently the biosensor is a 25-millimeter-square plastic chip that has a meandering flow line running through it. 目前，这种生物探测仪是一个大小为25平方毫米的塑料芯片，有一个弯曲的流水线从中穿过。
- Through double flow rate well testing, the reservoir and fluid parameters can be obtained from the data interpretation of the pressure buildup or breakdown in normal shut-in. 这种试井方法不但可以减少因正常关井测压对产油量和注水量的影响,而且可以减缓因突然关、开井造成的套管变形或损坏。
- Metal, glass, cool gray material, flowing lines, simple Qingling. 金属、玻璃，酷灰的材料，线条流畅，轻灵简约。
- Good venting of the cavity avoids corrosion caused by locked in gases at weld flow lines (Diesel-effect). 模具排气良好，会防止空气锁在模腔，引发烧焦导致磨损（内燃效应，如烤焦状）。
- This air line operates five main lines and twenty branch lines. 这家航空公司经营五条主干线和二十条支线。
- This paper gives an account of the structure and functions of the management information system of number lines operation on the microcomputer network. 介绍了一个在微机网络上运行的号线管理信息系统的系统结构及系统功能。
- In general, mold surface temperature lower than 82 C (180 F) may produce a hazy surface or a surface with flow lines, pits and other include defects. 大体上，形成表面的温度比82个C(180F)低可能用流程线生产一个朦胧的表面或者一个表面,坑和其他包括缺点。
- Managing MRO usage in each cell and line operation, decrease MRO cost to reach our target. 管理各作业小区和装配线的MRO使用,降低MRO成本并达到计划目标。
- A flowchart symbol that represents a break in a flow line and that indicates where the flow line is continued. 表示流线断开的一种流程图的符号,并且说明断开的流线在何处继续下去。
