您要查找的是不是：
- Only need to input size of workpiece, diameter of holes, stadia and quantity of workpiece when edit program, or use CAD/CAM direct conversion. 编制程序时，只需键入工件尺寸、孔径、准距、工件数，或用CAD/CAM直换转换。
- The results showed that within a certain diameter range hard-face depth of shell quenching was disrelated to the diameter of workpiece. 结果表明:采用喷水强烈冷却,在一定的直径范围内,薄壳淬火硬化层深度基本上与工件直径无关。
- addendum circle diameter of workpiece 工件顶圆直径
- The diameter of the tree-trunk is about 2 meters. 这树干的直径大约是2米。
- Measure the diameter of this circle. 量一下这圆的直径。
- We must gauge the diameter of wire first. 我们必须先测量电线的直径。
- The pond has a diameter of three hundred metres. 这池塘直径有三百米。
- The pond has a diameter of 2 hundred meters. 这池塘直径有两百米。
- The interior diameter of a hole,tube,or cylinder. 内径洞、管或圆柱体的内径
- Raising/lowing/rotation of workpiece adopts hydraulic control. 工件升降旋转采用液压控制方式。
- Must gauge the diameter of wire first. 我们必须先测量电线的直径。
- Measure the inner and outer diameter of big pipe. 用于测量大口径长钢管的内外径测量。
- What is diameter of circle provided? 着陆区直径?
- diameter of workpiece 工件最大直径
- The cylinder diameter of raceway center(mm. －滚道中心圆直径(mm)
- The circle has a diameter of 6 inches. 这个圆直径六英寸。
- The diameter of mass often exceeded 5 cm. 病变直径大于5cm 者多;
- The diameter of the objective of a telescope. 孔径望远镜物镜的直径
- The diameter of the throwing ring is 2.5 metres. 投掷圈的直径是2.;5米
- MINIMUM DIAMETER OF THE SUMP IS NPS 12. 排污箱的最小直径是NPS（公称直径）12（英寸）。
