您要查找的是不是：
- In fact, the deformation control goal of deep excavation not only includes retaining system, but also includes the adjoin environment. 实际上，深基坑变形控制目标不仅包括支护体系，而且包括相邻环境。
- This paper gives emphasis on discussion of the joint quality assurance and deformation control in internal bore welding at two ends. 本文着重论述双端内孔焊工作中焊缝质量保证及变形控制问题。
- In this bode, onsite welding and deformation control of the large pipe and barrel structures have been deeply analyzed,which is very useful for theory and practice. 本文重点对大型管、简构件的现场焊接及变形控制做了深入的分析和探讨，具有较强的理论意义和实际应用推广价值。
- The paper studies on deformation control problem in precast splice course of 25m wide arc prestressed concrete segment box beam in combination with Hu-Min Road Elevated Road Stage II Project in Shanghai City. 结合上海市沪闵路高架二期工程 ,对采用的 2 5m宽弧形预应力混凝土节段箱梁在预制拼装过程中的变形控制问题进行研究。
- In applying deformation control, it is vitally important to accurately determine the soil pressure being applied to the retaining structure, which is also closely dependent on the deformation of the adjacent soil. 目前基坑开挖设计已逐步由强度控制转变为变形控制,在变形控制当中如何准确地确定作用在支护结构上的土压力是至关重要的,而作用在支护结构上的土压力又与支护结构相邻土体的变形紧密相关。
- The deformation control construction and measurement method of the lap are introduced.The dynamic response and emendation problem are explored, and the lap improvement is proposed. 简单介绍了抛光盘变形控制结构和面形检测机构,对深非球面度面形变形进行了精度分析,探讨了主动抛光盘的动态响应和校正,并对抛光盘的改造提出了一些建议。
- The deformation control is a key point for building an oil tank on the soft soil, and how to determine the thickness of compressible stratum is a key agent for the influence on settlement. 摘要变形控制是在软土上建造油罐的一个重要环节，而如何确定压缩层厚度一直是影响沉降计算的一个关键因素。
- The research results are important in establishing deformation control standards on sea dike engineering during its construction period and in guiding the construction of similar engineering. 研究结果对于海堤工程施工过程中变形控制标准的建立及指导类似工程的施工具有重要意义。
- Welding Deformation Control for Derrick Boom 吊臂焊接变形的控制
- Study on Uniform Deformation Control of Forgings 锻件变形均匀性控制的研究
- Workpiece hardening and deformation controlling are realized by enhancing axiliary hardening area and changing hardened depth that can ballance the stress distribution in hardened workpiece. 采用增加辅助淬硬区和调整淬硬层深度的方法，使工件淬火后内应力分布平衡，达到了淬硬和控制变形的目的。
- Should industry be controlled by the state? 工业应该由国家控制吗？
- Industry rarely thrives under government control. 在政府控制之下工业很少会发达。
- A New Design Concept of Composite Foundation Deformation Control 复合地基变形控制设计新思想
- Those rebellious teenagers are hard to control. 那些反叛的青少年很难管教。
- Pollution control has cleared the air. 污染管制已净化了空气。
- An ASCII control character, end of medium. 一种ASCII码控制字符，媒体结束符。
- Criteria of deformation controlling 变形控制准则
- The study of computer controlled robots. 对受计算机控制的机器人的研究领域。
- The firemen were unable to control the blaze. 消防队员无法控制这场大火。
