该词条未找到_海词词典

您要查找的是不是：

K 30 C0G ceramic powder for sintering in reducing atmosphere. K 30 C0G瓷粉，适于在还原性气氛中烧结。
XRD, SEM and EDS are also used to analyze the ceramic powder. XRD、SEM和EDS分别用于分析和观察抗茵粉体的晶相结构、形貌及其元素成分.
The results showed that TiB?2?TiC ceramic powder could be obtained by SHS from B?2O?3?TiO?2?Mg?C system. 其化学反应机理为:Mg先还原B2O3和TiO2,新生的Ti与B和C反应生成TiB2和TiC;
The first utilizes a blend of finely ground ceramic powders. 第一种用的是一种磨细的陶瓷粉末混合物。
The copolymer dispersant for ceramic powder MAA/SAS was synthesized by methyl acrylic acid and sodium allylsulfonate. 摘要以甲基丙烯酸(MAA)和烯丙基磺酸钠(SAS)为单体，制得MAA/SAS共聚物。
The method studied has been used to instruct the production of lead titanate electric ceramic powder. 该方法已用于高纯超细钛酸铅陶瓷粉体材料生产中的控制分析。
Ceramic powder injection molding is a new molding technique developed from modern powder injection moldings techniques. 陶瓷粉末注射成形是从现代粉末注射成形技术中发展起来的一项新型成形技术。
Powder flame spray and spray fusig gun, with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder. 粉末火焰喷涂喷焊设备,配有各种粉末喷嘴,能喷涂金属微细粉末和氧化物涂层。
Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects,and can also be used for spary of ceramic powder. 粉末火焰喷涂喷焊设备。用惰性气体送粉，能得到更佳涂层品质，也可喷涂氧化物涂层。
The effects of structure of the coils and taper of the amplifier on the green density and sintered density of ceramic powder PZT were analyzed. 分析了线圈匝数和放大器锥角等因素对压坯和制品致密度的影响。
The new type of damping composites is consisted of chlorobutyl rubber, piezoelectric ceramic powder (PZT) and acetylene black. 这种新型的阻尼复合材料是由氯丁基橡胶，压电陶瓷粉体和乙炔炭黑混合而成。
The above finished products which are added with the Photoluminescent Ceramic Powder can be applied to all kinds of fields. 上述成品，这是补充，与光致发光陶瓷粉末，可用于各种领域。
Alkali resistant castable refractory was produced using hard clay clinker as main raw material and adding in potash feldspar, ceramic powder etc. 以焦宝石熟料为主要原料,添加钾长石、瓷粉等外加物,制备了耐碱浇注料。
LI Wen-xia, YIN Sheng.Low temperature combustion synthesis of ultrafine ceramic powder[J].J Chin Ceram Soc, 1999, 27(1):71-78. [19]李汶霞;殷声.;低温燃烧合成陶瓷微粉[J]
Good compatibility with ceramic powder , white and translucence solid , steady quality and no residue during wax removing. 本产品与瓷粉具有极佳的相容性。外观呈白色半透明固体，品质稳定，排蜡过程无残留。
The damping property of piezoelectric IIR filled with PZT piezoelectric ceramic powder and acetylene black was investigated. 探讨填充锆钛酸铅(PZT)压电陶瓷粉和乙炔炭黑的压电IIR阻尼性能。
Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects, and can also be used for spary of ceramic powder. 粉末火焰喷涂喷焊设备。用惰性气体送粉,能得到更佳涂层品质,也可喷涂氧化物涂层。
This paper discussed the basic technical progress of ceramic powder injection molding (CIM),reviewed the progress in research of CIM and the development trend of CIM. 本文重点介绍了陶瓷注射成形技术的基本工艺过程及发展概况,讨论了陶瓷注射成形技术的发展趋势。
The process of laser coating of super fine ceramic powder is discussed, and the hardness, roughness and adhesion force to the substrate of the coating are investigated. 介绍了激光熔覆陶瓷粉的工艺过程，并对熔覆层的硬度、粗糙度和熔覆与基底之间的结合情况进行了考察。
This article studies one kind of new damping compound material, It is consisted of bromobutyl rubber, piezoelectric ceramic powder (PZT) and acetylene black. 本文研究了一种新型的阻尼复合材料，它是由溴化丁基橡胶、压电陶瓷粉(PZT)和乙炔碳黑混合而成。