该词条未找到_海词词典

您要查找的是不是：

In this paper a function calculation method of preloaded bending moment distribution for leaves of spring is des... 本文介绍了一种用于板簧簧片预加弯矩分配计算的函数计算法,并给出了计算实例。
The goal of the exercise is to show the effect on the shear force and bending moment distribution of "smoothing" out the distribution of a load acting at a point on the beam. 这个练习的目标是显示作用于梁上的点集中作用力的分布其对剪力及挠曲弯矩分布的“平滑化”的效果。
Application of bending moment distribution and carryover limit formula to plate bending problems 弯矩分配传递极限公式在薄板弯曲问题中的应用
bending moment distribution 弯矩分布
The actual stress is not proportional to the bending moment. 实际上应力与弯矩不成正比。
But the bending moment at the central hinge must vanish. 但在中间铰处，弯矩必定为零。
There are many shortcut methods in moment distribution. 在弯矩分配中有很多的简化法。
The induced bending moment may lead to destructibility of the pipeline. 弯矩的产生可能导致管线的破坏。
Shear force is implicit in the development of bending moments. 杆中的剪力在弯矩的推导中是不明显的。
This increases both the rigid body rotation of the vehicle and the bending moment. 这既增加了飞行器的刚体转动，也增加了弯矩。
The no-shear moment distribution cannot be extended to multibay frames by the use of a substitute frame. 无剪刀力矩分配不可借用替代框架来推广到多跨框架。
In the FEM simulation of the loading identification process, the bending moment maintains a constant amplitude, hut its direction is alterable. 在有限元仿真计算中，弯矩载荷的大小保持不变，但方向可调。
The unique phenomena at any cross section of EULER compressive bar under the zero bending moment is analyzed. 从理论上分析了欧拉压杆任意截面上弯矩为零的状态下所出现的奇异现象。
The no-shear moment distribution also be extended to multibay frames by the use of a substitute frame. 无剪刀力矩分配不可借应用替代框架和进行力矩分摊推广于多跨框架。
The needed pipe bending moment、wall thickness reduction and ovality of section are known by simulating. 通过模拟,计算管子弯曲变形所需的弯矩,计算管子弯曲部分外壁减薄率和椭圆度。
Moreover, the influence of initial crookedness would be reduced as slenderness ratio and bending moment are increased. 初弯曲对杆件的影响随长细比和弯矩的增大而减小；
The no-shear moment distribution also be extended to multibay frames by the use of a substitute frame . 无剪刀力矩分配不可借应用替代框架和进行力矩分摊推广于多跨框架。
The bending moment of common prestressed concrete pipe piles is relatively low under the horizontal earthquake action. 摘要普通预应力混凝土管桩在水平地震作用下抗弯能力较差；
The connection of CHS T-joints with fold chord subjected to in-plane bending moment can be simplified as rigid joint. 在平面内弯矩作用下，弦杆为折杆的T型圆钢管节点计算可以简化为刚接节点模型。
The calculation of ledger maximum bending moment and deformation the even load of scaffold board and live loads above the ledger. 按照大横杆上面的脚手板和活荷载作为均布荷载计算大横杆的最大弯矩和变形。