该词条未找到_海词词典

您要查找的是不是：

There is stop groove in the bearing outer ring or it is simultaneously matched with snap rong. 轴承外圈开有止动槽或同时配上止动环。
To make sure that the bearing is only subjected to the axial load in such cases, the bearing outer ring must be mounted with radial clearance (fig). 为了确保在这种情况下轴承只承受轴向负荷,轴承外圈的安装必须带有径向游隙(图)。
Product is stabilization,that is the choice in surperfinishing water pump bearing outer ring and spin bearing outer ring. 产品型号稳定是加工水泵、纺织轴承外圈沟道最佳选择。
In SKF roller bearing units the necessary axial displacement occurs between the bearing outer ring and its seating in the housing bore. 在SKF滚子轴承单元中,轴承的外圈与其在轴承座孔中支承面之间会发生必要的轴向位移。
This paper analyses the burn problem produced from highspeed crush grinding of the bearing outer ring raceway. And a solution is presented, then good results are achieved by practical application. 本文对高速切入磨削轴承外圈沟道所产生的烧伤现象进行分析和探讨,并提出了具体的解决方法,在实践中取得了良好的效果。
For locating bearing positions and CARB bearings insert a locating ring between the bearing outer ring and housing shoulder on the locknut side of bearing. 为将定位轴承和CARB轴承的位置定准,将一个定位环插放到轴承外圈和轴承座挡边之间、轴承锁紧螺母的一侧。
steering worm bearing outer ring 轴向蜗杆轴承外环,转向蜗杆轴承外环
race grinding machine for ball bearing outer ring 球轴承外圈沟磨床
A Device for Grinding the Double Grooves in Bearing Outer Ring 单沟道磨床一次装夹工件磨削双沟道装置
Coning Deformation Analysis in Bearing Outer Ring Quenching 轴承外圈淬火锥度变形分析
Solving measure for the overproof of bearing outer ring's taper 正交试验法解决轴承锻坯外圈锥度超差
CNC race grinding machine for ball bearing outer ring 数控轴承外圈沟磨床
The outer ring contains the valence electrons. 排在外层的有价电子。
Deviation of a single width of the outer ring. 外圈单一宽度偏差。
Determination of Turning Allowance and Technological Specification of Bearing Outer Ring 轴承外圈车削留量及技术条件的确定
Effect of the Grinding Factors on the Inner Surface Roughness of the Ceramics Bearing Outer Ring 磨削因素对陶瓷轴承外圈内表面粗糙度的影响
Measurement of Raceway Diameter and Angle of Tapered Roller Bearing Outer Rings 圆锥滚子轴承外圈滚道直径及角度的测量
Inserting shims between a housing shoulder and a bearing outer ring or between the casing and the housing (fig 40), the housing being in this case the flanged angled insert; 在轴承座肩和轴承外圈之间或在防护罩和轴承座之间插入调节垫片(图40),在这个例子中轴承座有带法兰盘并成角度的插入件;
One integral flange on the outer ring and one loose flange ring. 外圈带一个整体式法兰和一个松配合法兰圈。
One intermediate ring between the two outer rings. 两个外圈之间带一个隔圈。