该词条未找到_海词词典

您要查找的是不是：

as cast nodular cast iron 铸态球铁
as cast high-tenacity nodular cast iron 铸态高韧性球墨铸铁
Fanlin Nodular Cast Iron Pipe Co., Led. 龙口市泛林球墨铸铁管有限公司。
New Martensite-Bainite nodular cast iron will be continued development. 新型马贝球铁在未来将会得到继续发展。
The mechanical properties of nodular cast iron can be further improved by isothermal quenching. 等温淬火处理可进一步提高球墨铸铁的机械性能。
The resistance to wear and corrosion of nodular cast iron pipe was increased remarkably by SHS.Combust... 自蔓延高温合成显著提高球墨铸铁管的耐磨损、耐腐蚀性能;
For the materials with low tensile strength such as cast iron, brass, aluminium, marble, leather and rubber. Etc. 适用于加工扩张强度低的金属及非金属材料,对铸铁、黄铜、铝、石材、皮革、橡胶、耐火物等材料的磨削、研磨及切割。
The results show that flame hardening is too an effective way to strength the surface of nodular cast iron. 结果表明,火焰淬火同样是一种强化球铁表面的有效途径。
However, brittle materials such as cast iron have high compressive strength but only a moderate tensile strength. 但是，像铸铁这种脆金属虽有较高的耐压强度，却只有较中等的抗张强度。
Material: Chilled cast iron, nodular cast iron(ductile iron), alloyed cast iron. 材质：冷硬铸铁，球墨铸铁（球铁），合金铸铁。
The technology of low temperature gas multicomponent permeation for nodular cast iron was studied. 对球墨铸铁的低温气体多元共渗技术进行了研究。
An investigation on cavitation erosion of nodular cast iron is presented in this paper. 针对球铁的汽蚀特性进行了研究,认为球铁中的石墨是球铁的汽蚀破坏源。
Jet pump may be all kinds of material, such as cast iron, steel, stainless steel, Hastelloy, titanium, ceramic, glass, plastics and graphite, and made of various sizes. 喷射泵可由各种各样的材料制成，例如铸铁、钢、不锈钢、哈氏合金、钛、搪瓷、玻璃、塑料和石墨，并可制成各种尺寸。
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap. 镍铁,强度高、塑性好。重要灰铸铁及球铁焊补用,如汽缸盖。
According to principle of damage mechanics, the damage characteristics of ferrite nodular cast iron under uniaxial stress has been studied through measuring electric resistance. 摘要根据损伤力学的基本原理，利用测量电阻的方法，研究拉伸受力状态下铁素体球墨铸铁的损伤力学特性。
This Article introduces the application of the pneumatic desulfurization technology with a porons-plug in nodular cast iron. 介绍了多孔塞气动脱硫工艺的特点,影响因素、参数控制和应用效果。
This paper discusses the advantages and disadvantages of all sorts of sample preparing methods in analyzing carbon of nodular cast iron. 摘要本文讨论了球墨铸铁总碳量分析样品的各种制取方法的优缺点。
Because of the grain refining and recrystallization, the matrix was strengthened and the synthetic properties of nodular cast iron were improved. 由于晶粒细化和再结晶结果,基本得到强化,提高了球墨铸铁的综合性能。
The microhardness of nodular cast iron and grey cast iron treated by the technology of low temperature gas multicomponent permeation was studied. 采用低温气体多元共渗处理工艺,对经处理的球墨铸铁和灰口铸铁的显微硬度进行研究。
The chemical composition and heat treatment process of alloy nodular cast iron bloom rollers were experimentally studied. 对合金球墨铸铁初轧辊的化学成分和热处理工艺进行了试验研究,提出了最佳热处理工艺。