该词条未找到_海词词典

您要查找的是不是：

The mechanisms of metallization of Aluminum Nitride ceramics by electroless plating were investigated in this paper by SEM. EDS. etc. 通过SEM、EDS等显微结构分析,探讨了AIN陶瓷化学镀法金属化机理,认为AIN陶瓷与金属镍层之间的粘结,主要归因于机械连锁作用。
translucent aluminum nitride ceramics 半透明氮化铝陶瓷
aluminum nitride ceramics 氮化铝陶瓷
Its comprehensive coverage focuses on aluminum nitride substrates. 它的广泛报导集中在铝氮化物基体。
Koya S, Yutaka W. Jointing Nitride Ceramics[P]. JP: 07011305, 1995-10-16. 专利专利所有者．题名（正体，实词首字母大写）[P]．国别：专利号，出版日期
Doctoral Dissertation: Low Cost Preparation of Aluminum Nitride Ceramic Substrate by Carbothermal Reduction Nitridation 氮化铝陶瓷基片碳热还原低成本制备技术研究
Sintering aids were one of key factors affecting microstructure and properties of silicon nitride ceramics. 烧结助剂是影响氮化硅陶瓷的显微结构和性能的关键因素之一。
The nanocrystal aluminum nitride was synthesized by carbothermal reduction (CTR) from alumina. 研究了氧化铝球磨对碳热还原反应合成氮化铝的作用。
This paper presents the dielectric and mechanical properties of porous silicon nitride ceramics. 研究了预烧结对反应烧结多孔氮化硅陶瓷的介电性能和力学性能的影响。
Synthesis and VioletLuminescence Mechanism of Hexagonal Monocrystal Aluminum Nitride Films[J]. 引用该论文吕惠民;陈光德;耶红刚;颜国君.
The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied. 研究了保温时间对气压烧结(GPS)氮化硅陶瓷晶界相及力学性能的影响。
Many companies use Aluminum Nitride(ALN) material to thermally dissipate heat out of the Laser. 很多公司都运用氮化铝材料驱散激光器的热量。
Silicon nitride ceram is widely used as a high-temperature structural material and is one of the most promising materials. 氮化硅陶瓷广泛用作高温结构材料，是很有前途的陶瓷材料之一。
The effect of sintered aids such as Y2O3, Li2O and CaO etc. on the properties of pressureless sintered aluminum nitride (AlN) was investigated. 研究了Y2O3,LiO2,CaO烧结助剂对AlN陶瓷常压烧结致密度和性能的影响。
In-situ porous silicon nitride ceramics were prepared directly by the use of silicon dioxide through the carbothermal reduction in nitrogen. 本课题就是利用二氧化硅在氮气中的碳热还原反应，一次原位直接制备氮化硅多孔陶瓷预制体。
Aluminum nitride (AIN) thin films have been successfully deposited on Si(100) and Pt/Ti/Si(100) by DC magnetron reactive sputtering. 采用直流磁控反应溅射法,在Si(100)和Pt/Ti/St(100)上制备了具有较好(002)择优取向性的AlN薄膜。
The cutting performances,the choices of machining parameters and the uses of silicon nitride ceramics cutting tools are introduced. 介绍了氮化硅陶瓷刀具的切削性能、切削用量的选择及其应用。
The results show the good crystallinity of the powder was obtained when using xylene as solvent,and the purity of aluminum nitride obtained increase with the reaction temp... 结果发现,用二甲苯为溶剂合成的氮化铝结晶度好,而生成的氮化铝纯度随着反应温度升高而增加,同时表面活性剂的加入对结晶度也存在一定的影响。
As a new type tool material, the excellent capabilities of silicon nitride ceramics cutting tools ravel out many cutting problems of super hard materials. 氮化硅陶瓷是一种新型刀具材料,其优良的切削性能解决了超硬材料的加工难题。
In this paper,the possibility of copper direct bonding to aluminum nitride substrate is studied,and the bonding mechanism is investigated by means of SEM and EDX. 研究了铜与氮化铝陶瓷直接键合的可行性,运用扫描电镜(SEM)、电子能谱(EDX)对键合机理作了一定的分析和探讨。