您要查找的是不是:
- The sizes of the latex particles are investigated by TEM. 利用TEM观察了乳胶粒子大小及规则程度。
- The nuclear-hull structure of the latex particles can be proved by means of SEM. 通过透射电镜的观察,证明胶乳粒子为核壳结构;
- Composite latex particles of disproportionated-rosin (DPR) and polyacrylates were synthesized by miniemulsion polymerization. 摘要通过细乳液聚合方法成功制备了歧化松香-丙烯酸酯复合高分子乳液。
- Latex particles were obtained by soapless emuls ion copolymerization of styrene (St) and methyl methacrylate (MMA) in the presen ce of functional monomer acrylic acid (AA) . 以苯乙烯、甲基丙烯酸甲酯为主单体,丙烯酸为功能单体合成了三元无皂乳液共聚胶粒。
- Results showed that with the decrease of the glass transition temperature and the size of the latex particles of the resin binder, the fire-retardant properties were improved. 研究结果表明,基质树脂玻璃化转变温度越低,乳胶粒子的平均粒径越小,防火涂料的耐火性能就越好;
- From TEM and DSC,it was found that the latex particles of the grafted copolymer looked like snowmen, while those of the non-grafted polymer and blended polymer were round. 实验结果表明:接枝聚合物的乳胶粒呈雪人型,而未接枝的、共混的丙烯酸乳液粒子呈圆形。接枝聚合物的玻璃化温度与未接枝、共混的丙烯酸乳液不相同。
- Comparisons were made in terms of the size and dispersity of latex particles as well as the glossiness, water resistance, solvent resistance and mechanical properties of the latex films. 测定了乳胶粒子的大小,粒径分布及胶膜的光泽度,耐水耐溶剂性,热学和力学性能。
- In this work, the PSt and P(St-MAA) latex particles with porous and nanocapsule structure were successfully synthesized via miniemulsion polymerization using different alkane as the porogen. 本文分别以不同的烷烃作制孔剂,用细乳液聚合法成功制备了具有多孔和微胶囊结构的聚苯乙烯和苯乙烯/甲基丙烯酸共聚微球。
- Hollow polymer particles can be obtained by core-shell emulsion polymerization on the base of the core particles and then by alkalization treatment of the core-shell latex particles. 该核乳胶粒经过核-壳乳液聚合和适当的碱处理工艺就可成为具有中空结构的聚合物微球。
- Abstract: The TEM has been used to study the changes of structure morphology of VAE latex and latex particles modified by hydrolytically grafting and physically blending,and their characterization. 作者简介:陈沛智,男,1943年生,教授。从事高分子乳液合成及表征工作,发表论文40余篇。获省科技进步奖一项。
- polymer latex particles morphology 聚合物乳胶粒形态
- carboxylated polystyrene latex particles 羧化聚苯乙烯微球
- The hydrolytic reaction,crosslinking reaction and latex particle structural morphology were characterized by IR and TEM. 以红外光谱、透射电子显微镜表征水解反应、交联反应及乳胶粒结构形态。
- The influence of agitation intensity and agitator types on size of latex particle, polymerization rate, and latex stability during emulsion polymerization is reviewed. 综述了乳液聚合过程中搅拌强度对乳胶粒径、聚合反应速率、乳液稳定性的影响及搅拌器形式的影响。
- The preparation in osmotic swelling and the application performances of hollow latex particle in electrophoretic display ware mainly discussed in this study. 本文研究的主要内容为以渗透溶涨法制备中空乳胶粒子,并研究其在电泳显示方面的应用性能。
- The smaller the latex particle size (Ps), the higher the dry, and wet pickings and paper gloss ;to acquire better opacity, larger particle size must be chosen. 小粒径者光泽度和乾、湿强皆佳,要有良好不透明度则需要大粒径之乳胶。
- The design of MSF microlatex filler for soft leather was reviewed in this paper. It is contained the design of molecule and latex particle, the selection of additives, etc. 论述了MSF微胶乳型软革填充树脂的设计问题,包括粒子设计、分子设计和助剂搭配等。
- The design of MSF microlatex filler for soft leather was reviewed in this paper,which contained the design of molecule and latex particle, the selection of additives, etc. 论述了MSF微胶乳型软革填充树脂的设计问题,包括粒子设计、分子设计和助剂搭配等。
- The particles in an atom are infinitely small. 原子里的粒子极小。
- He is studying the properties of these particles. 他在研究这些粒子的性质。