您要查找的是不是：
- Injection pressure and holding pressure i. 注射压力和保压压力。
- Hold Pressure Vessel Operation Permit would be preferalbe. 有压力容器操作许可证优先。
- Compressed air lines should be sized to hold pressure drops to a minimum. 压缩空气管道的尺寸应能维持压降在最低限度。
- The optimized holding pressure is in the middle of the maximum and minimum normally. 优化的保压压力一般为最低保压压力和最高保压压力的中间值。
- Maximum injection pressure and maximum holding pressure may be restricted due to molding condition. 有的情形下,最大注塑压力,最大保压压力会因成成形条件不同而受到限制。
- Attention: The holding pressure will affects the holding time. The higher holding pressure the longer holding time. 注意:保压压力会影响保压时间的长短。保压压力越大保压时间越长。
- Minimum holding pressure: based on the correct switch point, the pressure when the parts start to be empty. 最低保压压力:在准确的转压点基础上,给予一定的保压压力,当产品刚出现充模不足时的保压压力。
- A holding pressure unit allows the pre-plasticizer or a reciprocating screw to plasticize during the long holding time. 保压装置使预熔器或往复螺杆在冗长的保压时间内加料。
- It makes melt,plasticating,injection and holding pressure corse go on in the state of vibrating periodically. 分析了此种振动装置在注射阶段脉动螺杆的动态响应以及振幅和频率的特性。
- The two deices do clamping force measurement/control and caity pressure switchoer to holding pressure. 这两个装置就是锁紧力量测/控制装置和（射出）转保压的模腔压力转化装置。
- Xie family brilliancy : This regulation will give special attention to a "broad-brush" has taken hold pressure policy. 谢家瑾：这次调控特别注意了不搞“一刀切”，采取了有保有压的政策。
- Have a discussion on PVT state diagram of plastics injection molding coure,in this paper,basis principle for the PVT optimum holding pressure control is reviewed and give an example of use. 通过对塑料注射成型过程中PVT状态曲线的讨论，阐述了其最佳保压控制的基本原理及其应用实例。
- Hold pressure (bubbling pressure): Analyze into the CPU controller and the displayed outer pressure (self-displayed) are what the element inside the shelter stand is being borne from. 保压压力（泡点压力）：进入CPU控制器进行分析，所显示的为壳座内滤芯此时所受的外压力（自行显示）。
- How long will our food supplies hold out? 我们的储粮还能维持多久?
- He rescued a drowning child holding on to a plank. 他救起了一个紧紧抓住一块木板的溺水的孩子。
- Delay switching injection speed to holding pressure 延迟从注塑到保压的切换
- He hold on to my arm with a tenacious grip. 他紧紧抓住我的手臂不放。
- Reduce injection speed and holding pressure 减小注塑速度和保压压力
- The men are still holding out for more pay. 那些人仍然坚持非增加工资不可。
- It's my idea to hold the party outside the house. 在户外聚会是我的主意。
