您要查找的是不是:
- Design Test Model 设计试验模型
- Our test model was an LT with all the conveniences. 我们测试的型号,是集所有方便于一身的LT型号。
- This paper introduced a methodology of how to transform existing UML design model into UTP test model. 通过实例说明如何从UML设计模型转换为UTP测试模型的过程。
- Abstract: The paper introduces a design method for the static and dynamic test model of Yueyang Dongting bridge (three tower PC cable-stayed bridge with double cable faces ). 文摘:介绍了岳阳洞庭湖大桥三塔双索面PC斜拉桥全桥静动力模型的设计方法。
- A design method for the static and dynamic test model of Dongjiang Bridge (double-deck and three main trusses steel bridge with rigid cable) was introduced. 摘要介绍了东江大桥双层桥面三桁刚性悬索加劲钢桁梁全桥静动力模型的设计方法。
- The design and caculation of side drawing spindle structure of air pump lid test model for aluminium alloy parts with hole shaping by liquid forging have been intruduced. 通过对气泵上盖一模多件的工艺试验研究,介绍了铝合金挤压铸造带孔锻件时,试验模具侧抽芯机构的设计与计算。
- Testing model of mortar strength for concrete vess. 水泥船用砂浆强度试体试模。
- FeCl_3 (0.2%) is used as a carrier system and the analytical conditions for FIA are defined by a uniform design test. 以720nm为检测波长;用0.;2%25FeCl_3为载流;用单流路分光光度流动注射分析装置;测定酒石酸肾上腺素的含量。
- The formulae of Acyclovir disperse tablet were optimized in terms of disintegrating time by orthogonal design test. 以崩解时限为指标,采用正交设计试验,对阿昔洛韦分散片处方进行筛选。
- METHOD: To do Even design test on influence factors, and design a new formulae based on the results. 方法:作影响因素的均匀设计试验,并根据试验结果设计新处方。
- In the process of data processing, we mostly use path analysis and quantile regression to test model. 在数据处理过程中,本文主要利用路径分析、分位数回归等统计方法对模型进行了实证检验。
- Be responsible for new test equipement introduction, self design test equipment if necessary, compose equipment user manual. 负责新测试设备的导入、维护和校准,必要时进行自我研制,编写设备的使用和维护手册。
- This article illustrates a real problem diagnosing case to the navigation key during the design test phase for one mobile phone keypad. 摘要文章对某款手机在开发过程中导航键断裂进行了故意诊断。
- Fluid flowing barrier extends outwards continuously is a feature of pressure draw-down test model with low velocity nondarcy percolation. 流体流动边界不断向外扩展是低速非达西渗流压力降落试井模型的特点。
- Method:The formula of Fuyankang dispersed tablets were optimized in terms of disintegrating time by studying single factor and orthogonal design test. 方法:以分散均匀度为考察指标,采用正交设计试验,对妇炎康分散片处方进行筛选。
- The results suggest: (1) This short-term test model is fairly suitable for investigating AFB_1-induced hepatocarcinogenesis. 这提示:(1)本短期模型对于AFB_1诱发肝癌方面的基础研究是适用的。
- METHODS The formulae of Breviscarpin dispersed tablet were optimized in terms of disintegrating time by orthogonal design test. 方法以崩解时限为指标,采用正交设计试验,对灯盏花素分散片处方进行筛选。
- Involving effect of AGC (Automatic Gala Control), frame detection can be taken as a hypothesis test model with unknown parameters. 考虑到接收机自动增益控制(AGC)的影响;帧检测可以看作一个含未知参数的假设检验问题.
- In this paper,The author extraction of flavone by methanol from sour carambola leaves by single factor test and orthogonal design test was studied. 利用甲醇浸提,通过单因素试验和正交试验探讨从酸杨桃叶中提取黄酮的最佳工艺条件,为酸杨桃叶中黄酮类化合物的提取提供实验数据。
- This paper is to take the test model of a 1MW pulverized coal furnaces of four wall-tangentially-fired as the research subject. 本文以一台1MW的四墙切圆煤粉燃烧室为研究对象,对炉内的速度场以及颗粒的运动轨迹进行了计算分析。