您要查找的是不是：
- Standard Test Method for Determining Charpy Impact Strength of plastics 塑料摆锤冲击强度测定的标准试验方法
- Charpy impact strength 简支梁冲击强度
- High impact strength with good processability, high stiffness. 高冲击强度,良好的加工稳定性,阻隔性强。
- This paper based on K60 pipeline steel,by means of DWTT and Charpy impact test,given an analysis on pipeline steel low-temperature fracture toughness. 试验结果表明,随着壁厚的增加,K60级管线钢夏比冲击韧性变化不大,DWTT性能严重下降。
- Excellent Impact strength, Excellent resostamce to low temp. 冲击性优抗低温度。
- By changing the nolch local ion of Charpy impact test specimens studied the effect of nolch location on toughness and cracking process in multi-layer welds. 通过改变焊缝夏比冲击试样的缺口取向,研究了缺口位向对多层焊缝金属韧性及断裂过程的影响。
- The validity of method of dynamic fracture toughness measurement by instrumented Charpy impact test is analysed by use of the dynamic fracture test of 945-shipbuilding steel. 借助于船用945钢的动态断裂试验，对利用示波冲击测定材料动态断裂韧性方法的有效性进行了分析。
- Recommended for the formulations of powders with good impact strength. 用于生产高强度粉状涂料。
- The impact strength and the flame retardancy of the composites were tested. 并对复合材料的冲击强度、阻燃性能进行了测试。
- The influence of pre-heating temperature on organization and performance of X80 pipeline steel was investigated by weld thermal simulation technique and the instrumented Charpy impact toughness test. 通过焊接热模拟试验和冲击韧性试验,研究了不同预热温度对X80级管线钢组织性能的影响。
- It obtains low temperature toughness of China made grade X80 LSAW pipe by Charpy impacting test and DWTT. 通过夏比冲击试验和落锤撕裂试验(DWTT),测得国产X80级直缝埋弧焊接钢管低温韧性。
- In general, a greater impact strength is required for more demanding, harder-to-cut materials. 一般来说,一个更大的影响力需要采取更为严格、艰苦地降低原料。
- However, always using higher impact strength diamond that is more expensive will not always benefit the operator. 总是用金刚石冲击强度更高,更加昂贵永远不会惠及经营。
- STATISTICAL ANALYSIS OF CHARPY IMPACT ENERGY 摆锤冲击试验结果的统计分析
- Instrumented charpy impact testing 仪器化夏比冲击
- The ability of a diamond to withstand an impact load is typically referred to as diamond impact strength. 能否经受冲击负荷的钻石通常称为金刚石冲击强度。
- keyhole Charpy impact test specimen 钥匙形缺口冲击试样
- The testresults of impact strength, hardness, adhesive force of the cured layer showed thispolyester had better properties. 对固化膜的冲击强度、硬度及附着力等性能的测试结果表明，所合成的光敏不饱和聚酯的性能较好。
- The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength. 切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
- A foresaid structure made ASA had high notched Izod impact strength which was as high as 33kJ/m2. 上述结构赋予ASA以高抗冲性能,其缺口冲击强度最高可达33 kJ/m2。
