您要查找的是不是：
- Fe72.5Ga27.5合金 Fe72.sGa27.5 alloy
- HMn59-2-1-0.5合金 HMn59-2-1-0.5 alloy
- LaNi4.5Al0.5合金 LaNi4.5Al0.5 alloy
- La0.67Mg0.33Ni2.5Cu0.5合金 La0.67Mg0.33Ni2.5Cu0.5
- 奥氏体 FeCr18.2Ni6.9Mo2.5C1.5合金时效时可产生明显的二次硬化效果。 Austeinitic FeCr18.2Ni6.9Mo205C1.5 alloy can produce an obvious age hardening effect.
- Al-Mg合金 Al-Mg alloy
- Al-5%Si合金 Al-5%25Si alloy
- Ti-Al合金 Ti-Al alloy
- Al-5.7%Cu合金 Al-5.7%25Cu alloy
- Al-Pb合金 Al-Pb alloy
- 裂纹尖端应力场诱导氢原子扩散导致氢化物TiH2 析出是Ti5 5合金电子束焊缝氢致延迟裂纹扩展的主要机制 The mechanism of hydrogen induced delayed crack in EBW of Ti55 alloy is the diffusion of hydrogen up a stress gradinent to form hydride TiH 2 which precipitates at the crack tip.
- Cu-Al合金 Cu-Al alloy
- Al基合金 Al-based alloy
- Zn-Al合金 Zn-Al alloy
- Al-Sr合金 AI-Sr alloy
- Fe-5.7V合金 Fe-5.7V alloy
- Al-Sc合金 Al - Sc alloy
- 实验结果表明:Nd含量在10. 5时,Nd10. 5Fe80Zr3. 0B6. 5合金经最佳工艺,可以得到最好的磁性能,Br=9. 2kGs,Hcj=10. 12kOe,(BH)max=14. 25MGOe。 It is demonstrated that the best magnetic properties, Br=9.2kGs,H_cj = 10.12kOe,(BH)_max=14.25MGOe, had been gotten at Nd_10.5Fe_80Zr_3 0B_6.5 alloy after optimal thermal treatment. The relative content of the 2:14:1 phase increases with the increase in the Nd content.
- Al-Ca合金 Al- Ca alloy
- AI-4.5%Cu合金 AI-4.5%25Cu alloy
