您要查找的是不是:
- In this paper,the behaviour of the transverse load distribution of the girder shear force in a highway beam bridge is simply explained by using grillage analysis. 本文应用梁格分析方法,简述了公路梁桥主梁剪力荷载横向分布的特性。
- transverse load distribution factor 横向分布系数
- Analysis of Gear Transverse Load Distribution Factor 齿轮端面载荷分配系数分析计算
- A Sample Analysis of Transverse Load Distribution of Arch Bridges 拱桥荷载横向分布的实例分析
- Theoretical Analysis of Transverse Load Distribution of Arch Bridges 拱桥荷载横向分布的理论分析
- Method of calculation of transverse load distribution influence line for an articulated slab girder bridge 铰接板梁桥载荷横向分布影响线计算方法
- Study on the Calculation of the Transverse Load Distribution of Box Arch Based on the Quasi-slab Method 箱拱桥荷载横向分布计算的比拟板法研究
- Calculating transverse load distribution by energy method for the skew girder bridge 斜梁桥荷载横向分布的能量法
- A Calculation Method for Transverse Load Distribution of Skew Bridge with Parallel Beams 多梁式斜梁桥荷载横向分布计算的方法
- Calculation of Transverse Load Distribution of the Girder Bridges with Inequal Web-Distance Using G-M Method 用G-M法计算非均匀布置肋梁桥横向分布
- Simplified Analysis of Transverse Load Distribution for Curved Plate Bridges with Multicell Section 多格室曲线板桥荷载横向分布的简化分析
- Practical Methods for the Calculation of Transverse Load Distribution of Arch Bridges 拱桥荷载横向分布实用计算
- transverse load distribution 荷载横向分布
- In general, the top surface of the beam is acted upon by transverse loads. 横向载荷作用一般认为在梁的顶面上。
- Then the curves of transverse load and the axial thrust follow, which means that the coefficient of movement arm is the most critical to the failure of voussoir beam. 初始纵向载荷较低时,3条曲线中力臂系数首先取得峰值,其次是横向载荷曲线,最后是纵向载荷曲线,说明力臂系数对铰接拱破坏最为敏感;
- On-Site Measurement of Load Distribution in Reinforced Concrete Buildings During Construction. 钢筋混凝土结构课件。
- A rolling load distribution optimization algorithm of tandem cold mill was designed using particle swarm optimization algorithm. 摘要利用粒子群算法设计了一种冷连轧轧制负荷分配的优化方法。
- The method can be applied to slopes with any configuration, different layering and external load distribution. 该方法适用于任意几何形状、不同岩土材料分层以及多种荷载作用的复杂边坡。
- Propping transverse loading pushing ap-proach was applied in the deviation rectification course. 在纠倾过程中采用了顶升纠倾横向加载推进法。
- The stress-strain curve under transverse loading of MMCs has a corner point,associated with the init... 当存在渐进适应界面时,复合材料横向拉伸应力-应变曲线存在3个阶段。