您要查找的是不是:
- REPAIR THE OPEN 2-4 SOLENOID CONTROL CIRCUIT. 修理2-4电磁控制电路电阻开路故障。
- REPAIR THE OPEN UD SOLENOID CONTROL CIRCUIT. 修理UD电磁控制电路开路。
- Good knowledge of control circuit, PLC softwares. 对非标控制系统电路、PLC软件等有良好的知识。
- Is isolated from the drive control circuit. 与驱动控制电路隔离。
- Purpose: High voltage control circuit. 用途:高电压控制电路。
- MEASURE THE VOLTAGE AT THE TRANS RELAY CONTROL CIRCUIT AT TCM. 测量TCM的变速继电器电路的电压。
- REPAIR THE TRANS RELAY TC CONTROL CIRCUIT FOR A SHORT TO VOLTAGE. 维修短路到电压的变速继电器控制电路。
- In CAMA, the control channel is used to transmit control frames to reserve data channels. This prevents other nodes from sending data in reserved data channels. CAMA协议是一种多信道的预约型接入协议,该协议利用控制信道中交互的控制信息实现对业务信道的动态分配,实现了业务信道中业务数据的无竞争传输。
- The Control Circuit Designed By Average Current Mode. 平均电流模式的控制电路设计。
- Control Circuit Retrofit to 6 kV Break Switch in P.P. 发电厂6 kV小车开关控制回路的改造。
- Improved control circuit places monaural image in a stereo field. 在立体声领域,改进控制电路放置非立体声像。
- MMIT XTE made by UTMC and TMS320C5409, has been developed. It is main purpose that using of 1553 data bus realize of transmitting control instruction, data exchanges, communicating. MMIT XTE芯片和TMS320C5409设计和制作了总线控制器板和总线终端板,主要目的是利用1553总线协议协议实现控制器和终端的控制指令传输、数据交换、通信等功能。
- The AG systems transmit control pulses to the governor motor operators of the machines that are under control and operate to open or close the control valves to increase the input to the prime movers to restore and maintain correct frequency, as required. ag系统发送控制眼冲给调速器电动机的控制器,控制器受控后操作控制阀的开闭来增加向原动机的输入,这样来按需要恢复和保证正确的频率。
- Terminals of measuring and control circuits. 测量和控制回路终端。
- REPAIR OPEN WASHER PUMP CONTROL CIRCUIT BETWEEN THE BCM AND WASHER PUMP. 修改BCM和清洗泵之间歇路的清洗泵控制电路。
- LGA-W0406 type fix inductors are mainly used for the control circuit of motor. W0406型固定电感主要用于电机控制线路中。
- The invention discloses a gate driving circuit and a power control circuit. 本发明公开了一种栅极驱动电路与电源控制电路。
- Run engine & Adjust the control circuit as necessary for best performance. 运行引擎和调整为最佳性能所需的控制电路。
- Because TCP/IP is not suitable to transmit the data of audio and video frequency, the strategy of data transmitting from server to client is using TCP to transmit controlling signals and adopting UDP/RTP to transmit real time sound and image data. 因为TCP/IP不适合传输实时的音视频信号,本系统将从服务器到客户机的数据传输策略制定为:采用TCP来传输控制信息,而用RTP/UDP来传输实时声音和图像数据。
- Experiments shows that the control circuit meet the CPT's control request. 实验表明,该控制电路能够达到非接触能量传输系统的控制要求。