您要查找的是不是:
- Study on glass-protective lubricants for titanium alloy forging 钛合金锻造用玻璃防护润滑剂的研制
- With the development of new technology in aviation,it seems an inexorable trend that titanium alloy forgings will become larger and larger. 随着航空新技术的发展,钛合金锻件大型化是必然趋势。
- titanium alloy forging 钛合金锻件
- Titanium alloy blades artificial joints, golf heads face and auto connecting rod by precision forging. 钛合金精锻叶片、人工关节、高尔夫球头、打击面汽车连杆等。
- The hammer forging process of TC6 titanium alloy clasp has been simulated by using rigid-viscoplastic FEM. 在TC6钛合金卡环的高温锤锻过程中,模具承受非常大的应力。
- The Titanium alloy swashplate's pressure forging process,heat treatment criterion and process request are introduced and trial-manufactured. 介绍了钛合金斜盘模锻工艺流程、热处理规范以及工艺要求,并进行工艺试制和应用。
- The character and development of isothermal forging process,its forming temperature and forming rate for titanium alloy is introduced in this paper. 本文介绍了钛合金等温锻造技术的特点,国内外钛合金等温锻造的发展及其成形温度和变形程度等工艺。
- Abstract: After the configuration and the material performance of the Titanium alloy swashplate are analyzed, the pressure forging process is proposed in this paper. 文章摘要: 通过对钛合金斜盘的结构特点和材质性能进行分析,提出钛合金斜盘模锻成形工艺;
- After the configuration and the material performance of the Titanium alloy swashplate are analyzed,the pressure forging process is proposed in this paper. 通过对钛合金斜盘的结构特点和材质性能进行分析,提出钛合金斜盘模锻成形工艺;
- Thus the efficient measure of preventing from oxidization was introduced to improve the superplastic deformation and quality of isothermal forging for titanium alloy. 通过采取相应措施防止氧化,以提高钛合金超塑性变形的性能,确保钛合金等温锻造质量。
- EATR is simply a wolf in sheep’s titanium alloy armour. EATR 只是一只穿戴羊的钛合金盔甲的狼。
- It is the first time to adopt titanium alloy on domes interiorly. 在国内舰船上使用尚属首次。
- The casting can meet requirement of titanium alloy creep fixed treatment. 研制出的铸件满足了钛合金蠕变定形处理的要求。
- The forging process of the TC6 titanium alloy clasp is simulated by finite element method(FEM) and the simulation results,such as metal flow,forging load and die stress distribution,are obtained. 采用有限元法模拟了TC6钛合金卡环的锻造过程,给出了锻造过程金属的流动情况、锻造载荷以及模具的应力分布。
- The major factors of manufacturing TB2 titanium alloy wires are studied. The results indicate that using proper forging and rolling and drawing procedures can obtain wires with satisfactory surface. 对TB2丝材生产的主要工艺参数进行了分析研究,结果表明:采用合理的锻造、轧制和拉拔工艺可以获得表面良好的成品丝材。
- Titanium alloy material (TC4) samples were treated with nitriding technique. 牙用钛合金TC4,使用渗氮表面技术处理。
- In situ titanium alloy matrix composites were fabricated by melting casting. 用熔铸法制备了原位自生钛合金基复合材料。
- The experiment results on 2618 A A1 alloy are analyzed and the bases for determining the technical parameters of 2618A Al alloy forging parts are provided. 本文对2618A铝合金进行了大量的试验,并对试验结果进行了较详细地分析和研究,为2618A铝合金锻件研制过程中锻造工艺参数的确定提供了依据。
- Titanium Alloy Valve Retainer could help in reducing noise, friction, and vibration. 钛合金汽门帽可减低噪音、摩擦、震动。
- Based on the optimal process parameters, the ECAP processing of the Ti-6A1-4V titanium alloy has been carried out. 利用自行设计的ECAP模具,根据数值模拟确定的挤压工艺参数范围,实现了Ti-6Al-4V钛合金的ECAP变形。