您要查找的是不是：
- Big Diameter Sink Cyclostyle Thin Wall Tube Peg Pins Up Soft Groundsill 大直径沉模薄壁管桩加固软土地基
- thin wall tube peg 薄壁管桩
- The Deformation of thin wall tube in the process of multitool machining is analyzed by using ANSYS software. 应用有限元软件ANSYS对薄壁筒件多刀切削加工进行了变形分析,并从提高工艺刚度的角度出发,提出了相应的工艺措施。
- The rectangle thin wall tube of 316 stainless steel and the contortion thin wall tube of 663 copper alloy are fabricated by Laser Rapid Prototyping. 采用激光快速成型技术制备出316L不锈钢薄壁矩形管和663锡青铜扭曲薄壁方管。
- Air hole, burnthrough, cooapse and welding crackle occurred in the fixed overhead weld for aluminium and aluminium alloy tubes, above all the small-size thin wall tube. 针对铝及铝合金管,特别是小口径薄壁管固定口仰焊部位易出现气孔、烧穿、塌陷及焊接热裂纹等问题,分析问题存在的原因,从焊接工艺方面入手,提出一套消除气孔及烧穿的操作手法。
- Keywords Thin wall tube Cool bending Mandril; 薄壁管;冷弯成型;弯管芯棒;
- Keywords ANSYS;thin wall tube;multitool machining; 薄壁筒件;多刀切削;
- GBF excels in the thin wall tube GBF高强薄壁管
- Construction of the non - beam cast - in - place concrete GBF high strength thin wall tube hollow plate floor 现浇混凝土GBF高强薄壁管空心无梁楼板施工技术
- Analysis of axial stiffness for closing elastic thin wall tube with inside pressure 有内压封闭薄壁弹性圆筒轴向刚度分析
- Theoretical calculation of thin wall tube bending strain and process improvement 薄壁弯管变形量的理论计算及弯曲工艺的改进
- A cell looks like a bit of clear jelly with a thin wall round it. 在显微镜下,细胞看上去如一滴透明的胶状物体,周围有一层很薄的壁。
- Cold winds riddled through the thin walls. 冷风穿过薄墙。
- thin wall tube 薄壁筒件
- On Optimizing Technology of Thin Wall Tubes and Tube-sheet Welding in Ti Trans-heat Equipment Manufacture 钛制换热器薄壁管与管板焊接优化工艺
- The thin walls of the room echoed the crying. 哭声在斗室的薄板壁四周回响。
- A Numerical Approach for the Calculation of Plastic Strain of Thin Walled Tube Subjected to Combined Stresses 薄壁管复合载荷下应变增量的数值算法
- GBF excels in the thin walled tube installing anti- floats the processing measure discussion and the application GBF高强薄壁管安装抗浮处理措施探讨及应用
- Cathode Protection of Steel Tube Peg at WISCO Quay 武钢码头钢管桩阴极保护
- The Australian standard AS4100 - 1900 is the most accurate to calculate the thin wall steel tube strength. 用澳大利亚标准AS4100-1900计算薄壁钢管的强度最为准确。
