您要查找的是不是：
- slide valve spring 滑阀弹簧
- Remove valve spring and retainer. 拆卸阀弹簧和扣件。
- CAUTION: The check valve spring is in compression. 警告：止回阀弹簧处于压缩状态。
- Products available: diffusion pump, slide valve pump and so on. 工业干泵,扩散泵,旋片泵,机械增压泵,铝插板阀门,滑阀泵,滑阀及机械增压泵。
- For removal of valve stem seal and lower valve spring guide. 可用于拆卸汽门油封或降低汽门弹簧。
- Turn both handles of the rotary slide valve( pos. no.15) and the clutch to the emergency position, and the annunciator“ emergency” is lit on. 转动旋转滑阀15和离合器手柄到应急位置，指示器“应急“灯亮。
- Turn both handles of the rotary slide valve (pos. no. 15) and the clutch to the emergency position, and the annunciator "emergency" is lit on. 转动旋转滑阀15和离合器手柄到应急位置，指示器“应急“灯亮。
- Turn both handles of the rotary slide valve (pos. no. 15) and the clutch to the emergency position, and the annunciator “emergency” is lit on. 转动旋转滑阀15和离合器手柄到应急位置，指示器“应急“灯亮。
- Due to the release of pressure when removing the cover, the relief valve spring may eject quickly. 因为在拆卸阀盖时松开压力，安全阀弹簧可能会快速弹出来。
- Turn both handles of the rotary slide valve( pos. no.15) and the clutch to the position“ normal”, and the annunciator“ pneumatic control” is lit on. 转旋转滑阀手柄15和离合器手柄到正常位置，信号器“气动控制“灯亮。
- The procedure to prevent hardfaccd slide valve rod from crazing and distortion is put forware and rcsuits show that hardfaccd rod possesses good abrasiveness and long life. 现场使用表明:经喷焊强化后的滑阀杆具有较好的耐磨性,延长了使用寿命。
- Multi - purposed optimal design of reliability for valve spring based on fuzzy method. 基于模糊学方法的气门弹簧可靠性多目标优化设计。
- Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring. 拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
- Install a dial indicator so plunger contacts valve spring retainer as nearly perpendicular as possiblZero the indicator. 安装一个表盘式指示器，使柱塞与气门弹簧护圈尽可能垂直。将指示器调零。
- Check whether or not the fuel injection pump plunger and fuel outlet valve is worn or clogged, plunger spring and fuel outlet valve spring is broke. 喷油泵柱塞及出油阀是否磨损或卡死、柱塞弹簧及出油阀弹簧是否折断；
- Then, pneumatic valve spring made from this spring steel wire have been treated by this investigation of liquid tufftriding process. 然后 ,用以对此规格的钢丝制造的气阀弹簧进行了低温液体软氮化处理。
- Introduced the postulate, model and realize process of ant group arithmetic, and applied it in gas engine valve spring design. The result showed it's valuable for optimize design. 摘要介绍了蚁群算法的基本原理、模型和算法实现过程，并对内燃机气门弹簧进行优化设计，其计算结果表明该方法具有工程实用价值。
- The slide cut off the valley from the rest of the world. 山崩切断了这个山谷与外界的联系。
- This strain of wheat can grow during a cold spring. 这种小麦可以在寒冷的春天生长。
- Parallel gate valve Parallel slide valve 平行式闸阀
