该词条未找到_海词词典

您要查找的是不是：

An exergy method was used to study usage efficiency of single screw compressor's shaft power in the fuel cell vehicle. 摘要运用（火用）方法对车载燃料电池系统单螺杆压缩机压缩过程中的轴功利用效率以及耗散方式进行研究。
The main application range of die forging process on screw press are summarized. 本文总结了螺旋压力机模锻工艺技术的主要适用范围。
The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied. 以过氧化二异丙苯为引发剂，采用单螺杆挤出方法实现了ABS树脂接枝马来酸酐。
The single screw extruder is an important component in extrusion of polyolefin production. 单螺杆挤出机是一个重要的组成在挤压聚烯烃生产。
The article presents the principle, basic structure, main features and strike characteristics of new double strike electric drive screw press. 介绍了双击式直接电动螺旋压力机的工作原理、基本结构、主要特点及其打击特性。
We supply any types of air-cooling and water-cooling single screw air compressor, gratulate to choose and buy! 我们供应各种型号的风冷式、水冷式单螺杆压缩机，欢迎客户选购！
J53 double-wheel friction screw press, J54 friction coining press, FPRN screw press, J93 double-wheel friction brick forming press etc. 产品简介：J53系列双盘摩擦压力机，J54系列摩擦式精压机，FPRN系列螺旋压力机，J93系列双盘摩擦压砖机等
The processing equipments of FEP masterbatch are single screw extruder and double screw extruder. FEP色母粒的加工设备有单螺杆挤出机和双螺杆挤出机两种。
PP and PA6 were blended and extruded with a single screw extruder, PA6 could fibrillated in the matrix. 以聚丙烯为基体、尼龙6为分散相共混得到分散相成纤的原位复合材料。
The structure and the performance of the single screw extruder of electromagnetism dynamic are presented. 简要介绍了电磁动态单螺杆挤出机的结构性能,分析了螺杆在振动力场作用下的轴向受力状况。
The factors influencing the power condition of the screw press' locomotive parts have been introduced, with proposition of the corresponding solving method. 分类讨论了影响螺旋压力机运动部件支承结构受力条件的因素,并提出了相应的解决方法。
The forging and deep extrusion compound process for axle shaft tube was introduced,and the process was applied to the high-energy screw press and hydraulic press respectively. 介绍了一种半轴套管锻造及深孔挤压复合工艺,该工艺分别在离合器式高能螺旋压力机和液压机上进行锻造和深孔挤压成形。
Forging press, eccentric press, trimming press, knuckle joint coining and embossing press, pneumo-hydraulic hammers, rolling mill, cross wedge rolling machine, screw press. 锻压机;偏心压力机;整修压力机;关节接头模压和凹凸压力机;气动液压锤;轧钢机;横向楔形轧钢机;螺旋压力机.
The mixing facilities have experienced the following steps: Roll mixer,Banbury mixer,Single screw extruder,Twin screw extruder and Twin rotor continuous mixer. 混炼设备的发展经历了下列几个主要阶段:开炼机、密炼机、单(双)螺杆挤出机和双转子连续混炼机。
Rheological properties of HDPE/montmorillonite( MMT) nano-composite and HOPE were measured using a slit die rheometer attached to an industrial-scale single screw extruder. 采用两种不同口模厚度的窄缝流变仪研究了高密度聚乙烯(HDPE)/蒙脱土(MMT)纳米复合材料及其基体HDPE的流变性能。
The bearing characteristics and flow fields for filtering with a screw press filter with fixed and moving ring drums is simulated using ANSYS and CFX finite element software. 摘要为验证动静环式螺旋挤压过滤机的可行性及其优点，运用ANSYS、CFX有限元软件对动静环式螺旋挤压过滤机结构的承载特点及过滤流场进行模拟。
In this paper, the formulation and processing technology for CPVC thermal conductivity pipe produced by single screw extruder were investigated. 本文研究了适用于单螺杆挤出的氯化聚氯乙烯(CPVC)导热管的配方和工艺条件。
The novel structure is different from the overseas equitments as it is the creationary design based on the commen single screw extruder. 该新型结构不同于国外的已有设备，没有改变螺杆的构型，是在现有普通单螺杆挤出机结构的基础上进行的创造性设计。
The oil-filled EPDM,PP and super-fine talc powder were used as main materials, and EPDM/PP-TPV was prepared in single screw extruders by means of dynamic vulcanization. 以充油三元乙丙橡胶 (EPDM )、粉状聚丙烯 (PP)、超细活性滑石粉为基本材料 ,采用动态硫化法在单螺杆挤出机组上制备EPDM/PP共混型热塑性弹性体 (TPV) ;
This paper presents a method to calculate hitting power and hitting energy through detecting hitting velocity and acceleration of screw press,and proved it to be feasible in the process of testing. 本文提出通过检测螺旋压力机打击速度和打击加速度的方法来计算其打击能量和打击力,并在测试中证明该方法是可行的。