您要查找的是不是:
- signal voltage generator 信号电压发生器
- The offset voltage adds directly to the signal voltage and can be modeled as an unwanted voltage source in series with the intended signal. 偏移电压被直接叠加到信号电压之上,可以被模型化为一个未知的电压源,与已知信号相串联。
- It is convenient to measure the RCS, and the antenna pattern by this system having resolutions of both the turning angle of 1/36 degree and the echo signal voltage of 2.5mV. 该系统具有1/36度的转角分辨能力和2.;5mV的回波电压分辨能力;适用于目标RCS、天线方向性图等测量。
- On the LCD panel, an integrated driving chip having a controller, a memory, a level shifter, a source driver, a common voltage generator and a DC/DC converter is mounted. 在LCD板上安置具有控制器、存储器、电平移位器、公共电压发生器、DC/DC转换器的集成驱动芯片。
- The design parameters and some preliminary test results of this equipment including a 250 kV C-W high voltage generator, an accelerating tube and a duoplasmatron are reported in this paper. 文中描述了高压发生器、电压稳定系统,高梯度加速管和双等离子体离子源的设计、结构和试验结果。
- Testing methord of digital signal voltage 用频谱分析法测量数字信号电平
- Voltage generated by the motor at the instant of reclose may be equal to the supply voltage but exactly out of phase. 再合闸瞬间电机产生的电压可与电源电压相等但正好失相。
- peak-to-peak output signal voltage 输出信号的峰间电压
- Efficiency of impulse voltage generator 冲击电压发生器效率
- Design of Intelligent DC High Voltage Generator 智能直流高压发生器设计
- lamp system constant voltage generator 照明系统定压发电机
- Study on Impulse Voltage Generator with Steep Front 陡波头冲击电压发生器的研制
- Nominal voltage of impulse voltage generator 冲击电压发生器标称电压
- high voltage generator for x-ray X线用高压发生器
- A red light is usually a signal of danger. 红灯通常是危险的信号。
- An instrumentation amplifier is a device that amplifies the difference between two input signal voltages while rejecting any signals that are common to both inputs. 仪表放大器是一种放大两个输入信号电压之差的同时又抑制这两个输入端共模信号的器件,因此,仪表放大器在从传感器和其它信号源提取微弱信号时提供非常重要的功能。
- an electronic device for producing a signal voltage. 能够产生电压信号的电器装置。
- I stood watching for the signal to change to green. 我站着等待交通信号转为绿灯。
- Let's set the clock by the radio time signal. 咱们照着收音机的报时信号把钟对一对。
- This paper mainly designs the transponder of the radio frequency identification, and the circuit is divided into three parts:DC Supply Voltage Generation、Digital circuit and Analog circuit. 无线射频辨识系统架构可分为询答单元、读取单元及收发天线,本论文主要研究与探讨重点在询答单元部份,电路分成三个部份:电源电路、数位电路及类比电路。