您要查找的是不是：
- To obtain the parts surfaces' constant scallop height after machining, a new toolpath generation algorithm named as curved surface mapping approach for 3D equidistant path-interval and conto. 曲面映射法是依据加工后零件表面材料余量呈现“等残留高度”的要求,设计的一种生成空间等距环切加工刀具轨迹的新方法。
- Abstract： This paper analyzes the machining efficiency and the scallop height of 5 -axis surface machining with a filleted- end mill, and an efficient cutter- path planning method is presented. 摘 要： 分析环型刀五坐标加工的残余高度误差和加工效率，提出一种高效的刀位轨迹的规划方法。
- Keywords involute helicoid;profile;scallop height;NC milling; 渐开线螺旋面;端面型线;残留高度;数控铣削;
- Keywords NURBS;tool-path;scallop height;lapping;polishing; 刀具轨迹;残留高度;研磨;抛光;
- Keywords NC machining;plunge tooling;scallop height;tool path; 数控加工;插刀加工;残留高度;刀具轨迹;
- Some people like to eat scallop. 有些人喜欢吃扇贝。
- The climber fell from a great height. 攀登者从极高的地方坠落下来。
- Curved Surface Mapping Approach to Contour-Parallel Toolpath Generation with Constant Scallop Height 曲面映射法生成等残留环切加工刀具轨迹
- The twins are unequal in height. 这一对孪生儿高矮不一样。
- Keywords Signed Dupin indicatrix;Flank machining;Drum-taper type cutter;Scallop height; 关键词正向杜邦指标线;侧铣加工;鼓锥形刀;残留高度;
- From a precipitous height we look at the town spread out below. 我们从险峻的高处眺望铺展在下面的城镇。
- The total height is put at390 feet. 整个高度估计为390英尺。
- Keywords Virtual-axis machine tool;Freeform surface;Interpolation;Tool-path;Scallop height; 虚拟轴机床;自由曲面;插补;刀具轨迹;残留高度;
- She can see over the wall because of her height. 她个子高，能看到墙的那一边。
- Pop was at its height in the early 1960s. 通俗艺术在二十世纪六十年代初最为流行。
- The tree grew to a height of 20 feet. 那树长到二十英尺高。
- Can you guess the height of the tree? 你能猜出这树的高度吗?
- He erected himself to full height. 他把身子挺直。
- He has grown both in height and weight. 他身高和体重都增加了。
- He's about the same height as you. 他大约像你那么高。
