您要查找的是不是:
- rotating hook bobbin case tension spring screw 梭壳紧线弹簧固定螺钉
- rotating hook bobbin case tension spring 梭壳调线弹簧
- rotating hook bobbin case latch spring 梭壳针舌弹簧
- rotating hook bobbin case latch lever fulcrum pin 梭壳针舌杆支销
- rotating hook bobbin case complete 梭壳组件
- rotating hook bobbin case latch stop screw 梭壳针舌止动螺钉
- rotating hook bobbin case 梭壳体
- A new take-up device is adopted to re-shape the rotating hook shaft,the hook point and the bobbin case. 旋梭轴肩、梭尖以及旋梭套的形状有所改变;采用了一种新的挑线装置。
- Properly thread the bobbin case. 重新正确地穿梭壳的线。
- Replace the bobbin or the bobbin case. 请更换梭芯或更换梭壳。
- When making the sewing machine run idle, remove the bobbin case and the bobbin since there is the possibility that thread is entangled in the hook. 让缝纫机空转时,有可能机线空绕而卷绕不到旋锁上,因此请卸下梭壳和梭芯。
- It adopts link takeup lever. rotating hook, swinging needle bar,lower feed,to from the lockstitch NO.301 or 304 seam. 它彩用连杆挑线、旋梭钩线、针杆摆动、下送料、形成锁式301或304线迹。
- It adopts rotating hook driving axes as repairing structure which can ensure zigzag stitch evenly and without any fault. 采用旋梭驱动轴补偿机构,可确保无故障与均匀一致的人字车缝。
- Ltd.It adopts link takeup lever. rotating hook, swinging needle bar,lower feed,to from the lockstitch NO.301 or 304 seam. 它彩用连杆挑线、旋梭钩线、针杆摆动、下送料、形成锁式301或304线迹。
- The thread has not been passed through the notch of the bobbin case tension spring. 底线不能进入到梭壳的线张力弹簧下面。
- With two straight needles,self-lubricated vertical-axis rotating hook for catching thread looops and sliding cam thread take-up,the machine can producetwo lines of lockstitch. 本机采用双直针,立式自动加油旋梭勾线,滑杆挑线,构成二行双线锁式线迹。
- Removing the bobbin case. Raise the bobbin case latch to remove the bobbin case. 扳起梭壳的卡头,进行安装和拆卸。
- Removing the bobbin case。 Raise the bobbin case latch to remove the bobbin case. 扳起梭壳的卡头,进行安装和拆卸。
- Pass the thread through threading slit 1 in the bobbin case, and route it under tension spring 2. 把线穿过梭壳的穿线1,然后从线张力弹簧2的下面穿过。
- The thread has not been passed through the notch of the bobbin case tension spring . 底线不能进入到梭壳的线张力弹簧下面。