您要查找的是不是:
- The effect of discharge conditions on degradation of P-nitrophenol in organicpollution water with pulsed arc discharge plasma at atmospheric pressure was investigated in this paper. 摘要利用大气压下脉冲电弧等离子体对含对硝基苯酚的有机废水进行处理,研究放电条件对废水处理效果的影响。
- Study on Pulsed Arc Discharge Conditions on Production of Nitric Oxide for Medical Application 脉冲电弧放电产生医用一氧化氮的放电条件研究
- pulsed arc discharge 电弧放电
- pulsed arc discharge plasma 脉冲电弧等离子体
- By prevent arc discharge, which affect deposition stability and films quality, due to positive charge accumulation, 15kHz pulsed discharge supply is used. 另外选用15kHz的脉冲偏压防止正电荷积累太多就会引起弧光放电,影响镀膜工艺的稳定和薄膜的质量。
- Fluorescent is a low pressure mercury-smoke arc discharge lamp. 日光灯是一种低气压的汞蒸气弧光放电灯。
- We used DC arc discharge to synthesize carbon nanotubes. 在本论文中我们研究利用网印的技术来制做场发射显示器。
- Pre-heat suggested when MIG overlay welding for large size products and use pulsed arc welding while overlay the steel. 特别适合镀锌皮的MIG焊接,用于大焊件的MIG堆焊时建议预热,堆焊钢材时建议使用脉冲电弧焊。
- Furthermore, it controls the dynamic current rise behavior, the maximum current, and the droplet transition during the pulsed arc process. 此外,它在脉冲处理过程中能够控制动态电流提升性能,最大电流和熔滴过渡。
- The effect of second anode action on the cathode vacuum arc discharge stability in the cathode arc deposition technology is studied. 研究了阴极弧等离子体沉积中第二阳极现象改善弧放电稳定性的作用。
- Arc Discharge Influence on Output Characteristic of Gas Laser Resonator for Multi-pair Electrodes. 弧光放电对多电极对气体激光器输出特性的影响
- SWCNTs are produced by three main techniques: arc discharge, laser ablation and chemical vapor deposition (CVD). SWCNTs的制备方法很多,包括电弧放电法、激光蒸发法、化学气相沉积法(Chemical Vapor Deposition,CVD)等。
- Multi-arc ion plating technique is using cool cathode with self-maintaining arc discharge as evaporation source. 多弧离子镀技术是一种在真空中将冷阴极自持弧光放电用于蒸发源的镀膜技术。
- N-doped carbon coated Fe,Co,Ni nanocrystals were prepared by an AC arc discharge method under nitrogen buffer gas. 采用交流电弧法;在氮气氛下合成了氮杂碳包金属Fe、Co、Ni纳米晶.
- Low energy ions were produced in gas arc discharge,and the ions were accelerated into tyrosine(Tyr) aqueous solution. 分别以注入机和气体常压弧光放电产生的低能离子作用于固态和溶液中的氨基酸, 研究了样品红外光谱的变化。
- A method,degrading highly concentrated organic wastewater by gas-liquid phase gliding arc discharge,is introduced. 介绍了一种气液两相滑动弧放电等离子体处理高浓度有机废水的新方法。
- RCAE1047 will be stable in arc discharge at higher vacuum condition and lower arc current, especially for pure Zr target. 1047可以在高真空和低电流条件下稳定弧光放电工作,特别是采用纯锆靶材时。
- The coating nano-metal materials are prepared by physical adsorption, surface deposition, arc discharge, plasma polymerization, laser CVD and emulsion polymerization. 其制备方法主要有物理吸附法、表面沉积法、电弧放电法、等离子体聚合法、激光化学气相沉积法、乳液聚合法等。
- In the paper , the working principle and manufacture process of the bigger power arc discharge sources Were discribed briefly. 本文主要论述了大功率弧光放电电源的工作原理及其制造过程。
- In this paper, preparing nanocrystalline carbon nitride thin films has been investigated by using Arc Discharge and dc Hollow Cathode Discharge (HCD). 本文主要论述了采用弧光放电(Arc Discharge)和直流空心阴极放电(DC Hollow Cathode Discharge)两种方法来制备纳米陶瓷氮化碳薄膜。