您要查找的是不是:
- pulse shape control 脉冲波形控制
- There is no shape control in Visual Basic 2005. 在Visual Basic 2005中没有形状控件。
- Shape control was added at design time. 控件是在设计时添加的。
- This procedure has a time, a wide range of output pulse shape, control multiple relays. 本程序有计时;脉冲波形多种输出;控制多个继电器.
- In fact, SFR is heavily related to shape control. 自由规程轧制问题本质上是板形控制问题。
- The modulation of SBS pulse shape tends to occur with a short phonon lifetime. 声子寿命越短,SBS波形前沿就越陡,并且越容易出现调制现象。
- The pulse shape was smoothed by intrapulse stimulated Raman scattering. 脉冲内拉曼散射对脉冲有平滑作用;
- The Shape control in Visual Basic 6.0 Has no equivalent in Visual Basic 2005. Visual Basic 6.;0中的Shape控件在Visual Basic 2005中没有等效项。
- Shape control is control profile and control flatness of strip or sheet. 板形控制是控制带材或是薄钢板横断面形状和纵向平直度的。
- The aberration characteristic of pulse shape coming of FOD is different from SOD and TOD. FOD导致脉冲形状发生了畸变,畸变特点不同于二、三阶色散;
- The numerical simulation on pulse shape of two-cell SBS system was made and agreed with the experimental results well. 对双池受激布里渊散射系统的脉冲波形进行了数值模拟,理论计算结果与实验符合得很好。
- We introduce the principle of THz wave shaping and research development here.The waveform control of THz radiation can be fulfilled via the femtosecond laser pulse shaping. 介绍了利用激光脉冲整形对太赫兹波整形的原理和实验研究进展,通过对激发太赫兹辐射的飞秒激光脉冲整形,可以实现对太赫兹整形的控制。
- As PRF increases,the BER performance of this UWB system is much degraded under the conditions of fixed L and pulse shape. 当固定 L 和脉冲波形时,增大 PRF 将大大降低 UWB 系统 BER 性能。
- The evolutionary rules of the temporal pulse shape modulation, spectrum modulation and the intensity factor are reported. 通过数值模拟, 分析了时间调制、光谱调制以及强度的演化规律。
- In the Visual Basic 6.0 Example, the Shape control is used; it assumes that a Line control was added at design time. 在Visual Basic 6.;0示例中使用Shape控件;其中假定Line控件是在设计时添加的。
- However, temporal pulse shape modulation will exist due to the pulse coherence for chirped stacking pulse, and spectrum modulation will exist too. 但这种堆积啁啾脉冲在时间上由于相干而存在时间调制, 同时也将导致光谱存在调制。
- This paper introduces CVC technique briefly that improves the basic principle of shape control. 介绍了CVC技术改善板形的基本原理。
- The effect and ability of the shape control instrument on the aluminum foil rolling mill in Alcoa(Shanghai)Co. Ltd. 分析了美铝(上海)铝业有限公司铝箔轧机板形控制手段的作用和能力。
- At the same time, the mechanisms of size and shape control of metal nanoparticles are also summarized. 并总结了液相制备纳米金属粉的粒度和形貌控制作用机理。
- Control pulse is coupled into this pulse shaper by wavelength division multiplexer. Nonlinear phase shift of signal laser is induced by control pulse because of cross phase modulation. 该全光脉冲整形器利用波分复用器将控制光脉冲引入光纤环形镜中,控制光脉冲由于交叉相位调制在信号光上产生了非线性附加相移。