您要查找的是不是：
- Wheatstone Bridge Aided by Programmable Analog Circuit 在系统可编程模拟电路构成的测量电桥
- in-system programmability programmable analog circuit 在系统可编程模拟电路
- programmable analog circuit 可编程模拟器件
- in system programmability programmable analog circuits 在系统可编程模拟器件
- Salient Features of Electrically Programmable Analog Circuits IMP50E30 and Their Application 电子可编程模拟器件 IMP50E30 特性及其应用
- BSEE/ MSEE with3+ years exp in Analog circuit design. 电机工程学学士或电机工程学硕士，且具备3年或3年以上模拟集成电路设计经验。
- Good command of analog circuit with 2 yr above experiences. 2年以上模拟电路的开发设计经验。
- Separate power supply for Digital and Analog circuit. 数模电源分离。
- Programmable Analog Circuits 可编程模拟器件
- The analog part is the unit of analog circuit of double current loop. 模拟部分为双电流环模拟电路单元,触发器选用六脉冲触发组件板。
- Analog Circuit: An electrical circuit that provides a continuous quantitative output as a response from its input. 模拟线路:能对输入量响应为连续输出的电子线路。
- The servo simulator uses digital and analog circuit and it can simulate the characteristic of the servo. 模拟器采用数字和模拟电路，能够模拟各种型号伺服机构工作特性；
- This paper introduces the analog circuit fault diagnosis of conventional methods and pattern recognition methods. 本文介绍了模拟电路故障诊断的常规方法和模式识别方法。
- Through the analog circuit to extract the brightness's highfrequency components from composite video signal. 模拟电路用来提取复合视频信号中反映图像清晰的量,即亮度信号的高频分量。
- The method is applied to testability analysis in nonlinear analog circuit, an illustration validated this method. 最后将该方法运用于非线性模拟电路的可测性问题分析。实验结果验证了该方法的有效性。
- A threshold adjusted technique for low-voltage CMOS analog circuit is presented. 介绍了一种用于低电压CMOS模拟集成电路设计的阈值调节思想。
- An auto-companding technique on analog circuit behavioral modeling based on wavelet collocation method is proposed. 摘要提出了一种新的自动压扩方法，适用于基于子波配置方法的模拟电路行为级建模。
- Experimental results show that the analog circuit for phase sensitive detection can effectively suppress noise. 实验结果表明，模拟相敏检波电路具有良好的噪声抑制能力；
- In the meantime, the paper illustrates the design of the analog circuit in this system using the example of a voltage controlled oscillator. 同时，文章还以压控振荡器为例说明了在该系统中进行模拟电路的设计。
- Design flow of analog circuit begins with drawing schematic and includes simulation, layout, DRC/LVS check, parasitic extraction and post-simulation. 模拟电路从Schematic开始，其设计流程包括：仿真，版图绘制，DRC/LVS检查，寄生参数提取和后仿真。
