您要查找的是不是：
- piston rod with stuffing box 带加固套的活塞连杆
- THE SEALING BETWEEN THE CRANKCASE AND SCAVENGING AIR BOXES IS ACHIEVED BY MEANS OF PISTON ROD STUFFING BOXES. 曲柄箱与扫气箱之间的密封是通过活塞杆填料函实现的。
- In all designs, the valve stem normally serves as a piston rod with disc fastened directly to them. 在所有结构中，阀杆通常作为活塞杆，阀瓣直接固定在阀杆上。
- Hard-chromed piston rod with micro-grooves, increasing the rigidity and reducing friction, keep better lubrication action. 活塞杆微裂纹镀硬铬,增因硬度减少磨擦,保持油膜润滑效果值。
- piston rod stuffing box cup 活塞联杆填料函盖
- piston rod stuffing box gland 活塞杆填料函压盖
- piston rod stuffing box 活塞杆填密函
- Th e piston rod should befitted with the crosshead arenow going tryit. 活塞杆应与十字头孔配合。
- Stuffing box is integral with agitator base for positive alignment of shaft. 依据混合器轴的实际安装情况，设计一个完整的填料箱。
- Worn crankcase piston rod seals O-rings on. 曲轴箱柱塞连杆O型圈磨损或柱塞衬套磨损。
- Stuffing box is integral with agitator housing for positive alignment of shaft. 依据混合器轴的实际安装情况，一个完整的填料箱。
- Worn crankcase piston rod seals. 曲轴箱连杆密封件损坏。
- I didn't want to dignify Rod with an answer. |我不想让罗德因为我的回答而骄傲。
- Stuffing box finish to 63 RMS or better. 填料箱抛光度达到63RMS以上。
- It is usually a semicircular wheaten food with stuffing. 它是一种用小麦制成的有馅料的食物，通常呈半圆状。
- Replace crankcase piston rod seals. Replace O-rings. 更换新的曲轴箱柱塞连杆O型圈。
- Preserve the skin. Fill the animal with stuffing and sew it up. 保存好皮肤。在动物的肚子里塞些填料，然后缝好它的肚子。
- External diameter E and piston rod diameter D will not comply with the above standard due to different applications. 根据用途，缸体外径E，活塞杆直径d有时与上述尺寸不同。
- A steel rod with a sharp point,used for breaking up blocks of ice. 有尖头的钢棒,用来打碎冰筷。
- When assembling, leave the mark on body of piston rod frontward. 装配时，杆身上的记号要朝前。
