您要查找的是不是：
- pinion shaft inside bearing [化] 小齿轮内侧轴承
- The pinion shaft runs in porous bronze bearing bushes. 小齿轮轴运行多孔青铜轴承衬套。
- Remove the universal joint strap bolts at the pinion shaft yoke. 在小齿轮轴轴轭处拆卸万向节扣夹螺栓。
- Hold the yoke with Wrench 67Remove the pinion shaft nut and washer. 用扳手6719握住轴轭。拆下小齿轮轴螺帽和垫圈。
- Seal air is injected into the labyrinth seals located at the main motor shaft (top and bottom) and at the pinion shaft driving the motor. 密封空气被注入到主马达轴（顶部和下部）和驱动马达的齿轮轴的迷宫式密封里。
- A pinion shaft, the rack shaft, and a rack guide holder are assembled in a housing, and an adjust screw is strongly tightened to press the rack guide holder toward the rack shaft under an overload. 齿轮轴、齿条轴和齿条导向支架安装于壳体内，并且调节螺杆在载荷作用下非常紧地将齿条导向支架压向齿条。
- wheel cylinder adjusting pinion shaft 轴闸储气筒调准小齿轮轴
- The new DS Inside bears little or no resemblance to that legendary silhouette, however. 新德尚内负有很少或根本没有类似的传奇轮廓，但是.
- Bead inside bore of bearing, the large surface is divided into several small ones, the number of flaws are decreased and the bond strength of spraying layer and substrate is strengthened. 对轴承座内孔进行堆焊 ,将大表面分割成小表面 ,减少了喷涂层收缩时形成的裂纹 ,提高了喷涂层与基体的结合强度。
- Bead inside bore of bearing, the large surface is divided into several small ones, the number of flaws are decreased and the bond strength of spraying layer and substrate is streng... 对轴承座内孔进行堆焊,将大表面分割成小表面,减少了喷涂层收缩时形成的裂纹,提高了喷涂层与基体的结合强度。这两种方法适合大型轴类零件的表面强化和修复。
- The introduction is the strong and straight cone the wheel gear pare away to process the inside,whetting center the bore,whetting the inside bore in the strong wheel gear. 介绍在硬齿面直齿锥齿轮刮削加工中研中心孔磨内孔的技术要求;机床调整,切削速度,刮削量及次数的选择。
- pinion shaft outside bearing 小齿轮外侧轴承
- The part of a machine shaft or axle supported by a bearing. 轴颈机械的转动轴或轮轴中由轴承所支撑的部分
- Refer to Drive Pinion Bearing Pre-Load Adjustment. 参阅驱动小齿轮轴承预荷调整。
- After finger-tightening the bolts so that the circumference of the inside bore of each flange snugly touches the gasket seal of the companion flange, make sure the valve is aligned before proceeding. 在手动紧固螺栓，使得每个法兰的镗孔内侧圆周贴紧配对法兰的密封垫片后，在继续安装前，要确认阀门已经对齐。
- Install pinion front bearing, if necessary. 如需要，安装小齿轮前轴承。
- This lock can only be opened from the inside. 这把锁只能从里面打开。
- The earthen pot is glazed inside. 瓦盆里面挂一层釉子。
- A slot for a key in the hub or shaft of a wheel. 键槽轮子的毂或轴里的键的沟槽
- He waved down a taxi and quickly got inside. 他扬手叫住一辆出租汽车，一下子钻了进去。
