该词条未找到_海词词典

您要查找的是不是：

Properties of Open Cell Aluminum Foams Prepared by Space-holder Method 添加造孔剂法制备开孔泡沫铝及其性能研究
Effects of Heat Treatment on the Mechanical Properties and Energy Absorption Characteristics of Open Cell Aluminum Alloy Foams 热处理对泡沫铝合金力学性能及吸能性的影响
Simulation of A Static Bubble Formation Process of Closed Cell Aluminum Foam 静态条件下闭孔泡沫铝气泡形成过程模拟研究
Fly ash particles act as viscosity increaser and increase stabilization of cell wall in the aluminum foam. 将粉煤灰加入到熔融铝液中,经适当搅拌后,再加入发泡剂,经冷却,即可得到颗粒增强泡沫铝。
Control is placed in the next open cell of the. 控件的下一个打开的单元格中。
The open cell alumina foam ceramics were prepared by impregnating a polymeric sponge with aqueous ceramic slurry. 采用有机泡沫前驱体浸渍工艺制备氧化铝泡沫陶瓷。
We are looking for Polyurethane foam (open cell) type. If your esteemed company is in position to su... 发布者：谢高峰所在地：山东泰安市行业：精细化学品职位：业务主管工作年限：
Memory foam is an open cell foam that compresses fully and reverts to its original form. 记忆泡沫塑料是一种结构疏松的泡沫塑料，即使将它完全压缩，它也能够回复到原来的形状。
Thornton P H,Magee C L.The Deformation of Aluminum Foams [J].Metallurgical Transaction,1975,6A:1253-1278. 陈雯刘中华.;泡沫金属材料的特性;用途及制备方法[J]
The process of producing open cell pdyurethane foam was introduced.The effect of the types of polyalcohol on the performance of open cell polyueethane foam was discussed. 介绍了大孔径网状聚氨酯泡沫塑料的制备工艺,讨论了多元醇种类对网状聚氨酯材料性能的影响。
The quasi-static indentation experiments of the pure aluminum foams and the Al-Si alloy foams were carried on using three types of indenter with different end geometries,i. 分别采用头部为平面、球面和圆锥面的三种圆柱体压头,对泡沫纯铝和泡沫铝-硅合金进行了准静态压坑试验,研究不同性质的基体泡沫铝的压坑变形力学行为,探讨压坑变形的微观机制。
There are various preparation methods of aluminum foams and these methods can be falled into three broad classes: liquid-phase method, solid-state method and deposition meth. 泡沫铝的制备方法有很多,可分为液相法、固相法和沉积法三大类。
The results reveal that the deforming behavior and the energy absorption properties of aluminum foams are significantly affected by the property of their matrix. 结果表明,基体性能对泡沫铝的压缩行为和吸能性有显著影响。
The quasi-static three-point bending behavior of square aluminum extrusions with aluminum foam filler is studied. 摘要研究了泡沫铝填充的方形铝管的准静态三点弯曲行为。
A theoretical and experimental investigation into the anisotropic elastic properties of open cells foams with Kelvin cells was conducted. 采用理想排列的十四面体结构模型,从理论上和试验上对开孔泡沫铝的弹性常数随偏转角的变化过程进行了探讨。
Quasi-static axial compression tests are carried out to study the crushing behaviors of the aluminum foam filled hat sections. 通过试验方法研究了泡沫铝填充帽型结构准静态压溃时的吸能特性。
The results show that coiling the powder together with steel plates can successfully form the structure of aluminum foam sandwich (AFS). 研究表明，采用粉末与钢板轧制工艺可以成功地制备出钢面板泡沫铝夹心结构；
The upper layer forms an open cell matrix when exposed to a jet fire to permit passage of gasses from the lower layer to ambient. 上层当暴露于喷射火焰时形成开孔基体，使得气体能经下层通到环境中。
Moreover, the compr essive experiments for ZL104 foam alloy and aluminum foam with different densi ties were conducted.The results showed that the densit... 另外,对不同密度的泡沫ZL104合金及泡沫纯铝进行了压缩试验,结果表明:密度对压缩力学性能和吸能性具有显著影响;
The results showed that electrochemical capacity of a conventional three - electrode open cell was higher than that determined in a sandwiched and in a sealed Ni/MH test cell. 结果表明,开口式三电极系统测出的放电容量明显高于夹片式和模拟电池所测出的放电容量,而夹片式电极系统测试的结果和模拟电池测试的结果比较一致。