您要查找的是不是：
- multiple device controller(MDC) 多路设备控制器
- multiple device controller 多重设备控制器
- Each device controller is in charge of a particular device type. 每一设备控制器负责一个设备类型。
- Because controls support multiple device filters, it is possible to define many template sets for a control. 因为控件支持多个设备筛选器,所以有可能为一个控件定义许多模板集。
- A complete USB system consists of host controller, USB hub and device controller. 一个完整的usb系统包括主机控制器，集线器和设备控制器三个主要端点。
- H. Luo, “Integrated Multiple Device CMOS-MEMS IMU System and RF MEMS Application”, Ph.D.Thesis, ECE CMU 2002. 孙志铭;“CMOS微透镜移动平台之设计与制造”清华大学2006.
- Device controller informs CPU that it has finished its operation by causing an interrupt. 设备控制器通过引起中断通知CPU操作已完成。
- Device controller transfers blocks of data from buffer storage directly to main memory without CPU intervention. 无须CPU的介入,设备控制器直接把数据块从缓冲区存储传送到主存。
- XHTML is an XML-compliant markup language, based on HTML 4.1, which allows you to create Web sites that are suitable for multiple device types. XHTML是基于HTML 4.;1的符合XML的标记语言;它允许您创建适合多种设备类型的网站。
- Using Visual Studio 2005 you can create a single device project that targets multiple device platforms, such as Pocket PC 2003 and Smartphone 2003. 使用Visual Studio 2005,您可以创建一个面向多个设备平台(如Pocket PC 2003和Smartphone 2003)的设备项目。
- In conclusion, this paper realized the USB device controller and USB host controller. 本文完成了USB设备控制器和主控制器的设计和实现。
- With multiple devices in the system, there is a level of fault tolerance. 系统中有多个设备时,有一个容错级别。
- These are short data packets for device control and configuration, particularly at attach time. 这些是一些短的数据包,用于设备控制和配置,特别是在设备附加到主机上时。
- However, the KNI is sometime more appropriate for certain kinds of complex device control operations. 然而,有时KNI会更适用于某些特定种类的设备控制操作。
- Because of the unavailability of bidirectional power switches,the use of multiple devices to constitute a bidirectional power switch make the control more complex. 由于矩阵变换器的双向开关都是由分立器件组合而成,使得矩阵变换器控制实现相对复杂。
- In general, the device controller will request bus mastership and once this has been obtained will transfer one or more data items. 一般来说，设备控制器将请求公共汽车精通和，一旦这获得了转移一个或更多数据项。
- USB2.0 device controller IP consists of a UTMI (USB Transceiver Macrocell Interface) and a USB interface protocol controller. USB2.;0设备控制器IP核包括UTMI收发器和协议控制器两部分。
- People can realize data acquisition and device control of GPIB instrument use the USB interface of the PC with this controller. 参与研究开发了USB-GPIB控制器，通过该控制器可以实现利用PC机的USB接口对GPIB仪器的数据采集及设备控制。
- A serial data output permits cascading of multiple devices in applications requiring additional drive lines. 串行数据输出允许在需要附加驱动线路的应用中进行多器件级联。
- To dial multiple devices, both your connection and your remote access server must have Multilink enabled. 要拨打多重设备,您的连接和远程访问服务器都必须已启用多重链接功能。
