您要查找的是不是:
- In this paper, one part elastic epoxy resin sealant was prepared, it has character of rapid middle temperature cure and sag resistance, especially can be applied on line production. 研究了一种单组分的弹性环氧密封胶,具有中温快速固化和抗流挂性能,尤其适应于工厂的生产流水线。
- The middle temperature cure and one-part elastic epoxy resin sealant 一种中温固化的单组分弹性环氧胶的研究
- IR analysis of curing and decomposability of one component middle temperature curing heat-resistant adhesive 中温固化单组分耐热胶粘剂的固化和分解行为的红外分析
- middle temperature curing 中温固化
- Experiment indicated that TPX mould was an ideal plastic mould for casting of epoxy resin which was suitably curing at high or middle temperature. 实验表明它是一种适用于高、中温固化环氧树脂浇铸成型的理想的塑料模具。
- In order to meet the demand of the heat-resistant encapsulation adhesive curing at middle temperature,a kind of new encapsulation adhesive was researched. 为满足灌封胶黏剂中温固化耐高温的要求,研制新型耐高温灌封胶黏剂体系是十分重要的。
- Two components modified epoxy with barrier pigment. Low temperature curing. 含有封闭型填料的双组分改性环氧漆。可低温固化。
- The results show that the comprehensive properties of room temperature curing DAIP resin system are better. ? 结果表明:室温固化DAIP树脂体系具有较好的综合性能。
- An alternative plan about the non isothermal inner temperature curing was provided. 根据外温变温试验结果还提出内温变温加热设想。
- The results show that the comprehensive properties of room temperature curing DAIP resin system are better. 结果表明:室温固化DAIP树脂体系具有较好的综合性能。
- Formulated white pigmented epoxy resin used in combination with hardener K-92 for solvent fee, room temperature curing chemical resistant linings. 白色涂料聚合树脂,与K-92固化剂组合,用于无溶剂室温固化抗化学腐蚀内衬。
- Key problems on energy saving of high emissivity coating at middle temperature are discussed. 本文论述高发射率涂料在中温下使用,节能的若干关键问题。
- Low viscosity, a room temperature curing amine hardener. Specially formulated filler is recommended for casting of patterns and moulds. 低粘度,室温固化胺类固化剂,特别用于浇铸模具的制作。
- Desulfurization process of a single CaO particle at middle temperature had been calculated using grain model. 本文采用晶粒模型对中温条件下单颗粒石灰石脱硫过程进行数值模拟。
- The influence of alkyd resin, selected amino resin and solvents on the low temperature curing and quick drying of amino enamel is discussed. 讨论了合成的醇酸树脂、选用的氨基树脂及溶剂对氨基漆低温快速固化方面的影响。
- The middle temperature TTT-curve may be consisted of several C-curves to form several bays. 由C曲线组成中温TTT图,能形成几个海湾。
- A high temperature resistant coating is developed which is composed of epoxy organosilicon resin, nano-filler and room temperature curing agent. 以环氧树脂化学改性有机硅树脂为基体材料,纳米粒子为填料并采用了常温固化体系,研制了耐高温防护涂层。
- Flow Control Agent for Powder Coating, Non-Yellowing Degassing Agent, Matting Agent, Low Temperature Curing Epoxy Hardener. 粉末涂料专用 - 流平剂、防黄变消泡剂、消光剂、环氧低温固化剂。
- The properties of room temperature curing castoroil polyurethane/ unsaturated polyester IPNpolymer primer-in-rust has been reported. 报道了蓖麻油聚氨酯与不饱和聚酯组成的互穿网络聚合物(IPN)作为室温固化带锈涂料的性能。
- This paper focused on describing planning research of power generation from middle temperature flue gas waste heat in Jiao Zuo cement plant. 本文论述了焦作水泥厂中温烟气余热发电方案研究。