您要查找的是不是：
- liquid silicon infiltration 液相渗硅技术
- This entire setup is housed in a body of non-toxic LSR - Liquid Silicon Rubber. 由于是以橡胶为主要材料，所以整个炉子比较柔软，不使用时，可以弯曲储藏。
- The mechanics property of the AlN/SiC-Si composite was much better than the AlN/C composite.The principle of the molten silicon infiltration was also analysed in this article. 3.;在高温下熔融渗硅将AlN/C复合材料中多余的碳转化为碳化硅，制得AlN/SiC-Si复合材料，使得力学性能得到很大的提高，并对渗硅原理进行分析。
- LS liquid silicon rubber, printer ink : The liquid silicon can solidify into a plyable/flexible form under different conditions. LS液体矽橡胶、油墨:液态矽橡胶可在不同的条件下硬化成弹性体.
- Inside, blond technicians in goggles tease metres-long crystals out of vats of liquid silicon and slice them into the thinnest of wafers, to be used in solar panels. 在工厂里，戴着防护镜的金发技师们将大桶的液体硅加工成为数米长晶体物，并将这些晶体物切割成为最薄的晶片，最终用于制作太阳能电池板。
- Molten silicon infiltration (MSI) 熔硅浸渗
- The application and progress of HTV silicone rubber, RTV silicone rubber and liquid silicone rubber to electrical insulator were introduced. 简述了国内外硅橡胶(高温硫化型硅橡胶、室温硫化型硅橡胶、液体硅橡胶等)在电气绝缘方面的应用情况。
- Seven parts are manufactured in PP and ABS, whilst the other two are in LSR (liquid silicone rubber). 七个部分生产聚丙烯和ABS ，而另外两个是在路由器（液态硅橡胶） 。
- All nipples are made of food grade, heat-resistant liquid silicone, which is Nitrosamine-free, non-sticky, odorless, safe and conformed to the FDA. 奶嘴采进口食品级耐高温液态硅胶制成.;不含致癌物质亚硝氨;无毒;无味
- Industrial high performance foams, fine celled polyurethane foams, cellular silicone foams, liquid silicone rubber, high frequency circuit materials, flexible circuit materials. 工业用高性能泡绵、细孔聚氨脂泡沫材料、孔硅泡沫材料、体硅橡胶、频印刷线路板材料、性印刷线路板材料。
- All nipples are made of food grade liquid silicone, which is heat-resistant, non-toxic, non-sticky, odorless, Nitrosamine free and complies with the FDA. 奶嘴全部原材料均采进口食品级液态硅胶;材质安全;不含致癌物质亚硝氨;无毒无味耐高温;符合FDA标准.
- With MQ resin as reinforce filling materials, dimethicone as dilution agent, the transparency liquid silicone that used in spinning trademark was prepared by fumed silica. 以白炭黑、乙烯MQ树脂为补强填料，以二甲基硅油为稀释剂制备纺织商标用透明液体硅橡胶。
- Silcotech Group is a multinational liquid silicone molding company and one of the most significant and technically advanced liquid-silicone molders in the world. 思科特集团是一家跨国的液态硅胶注射成型公司，而且在业界是其中一家知名度极高及在有关技术上有着领先地位的生产商。
- Most synthetic detergents are in the form of powder or liquid. 大多数合成洗涤剂呈粉状或液态。
- Be careful not to lose too much liquid by evaporation. 小心，不要因为蒸发作用而失掉过多的水份。
- The surface of the liquid gradually crusted over. 液体表面渐渐地结了一层皮。
- melt silicon infiltration 熔硅浸渗
- The prime coating of additional liquid silicone rubber was prepared with polymethyl hydrogen siloxane, silicone resin, silicone-modified acrylic resin, epoxy resin, disiloxane as film formers. 介绍了以聚甲基氢硅氧烷、硅树脂、有机硅改性丙烯酸酯、环氧树脂、含丙烯酰氧烃氧基及烷氧基的二硅烷(或二硅氧烷)等为成膜剂的加成型液体硅橡胶用底涂剂的配制;
- There are seven cases aged from 35 .to 62 years old, that underwent periorbital liquid silicone injection.All had erythema, swelling and induration, three of them had silicone migration. 本文共讨论七个病例，男女老少皆有，基于爱美的心态，曾在前额、上下眼皮、颞部等部位接受小针美容，一段时间后在原注射处，或矽油移行分布至眼皮周围，或形或红肿或变形，甚至在皮下可摸到硬块状异物。
- molten silicon infiltration 液态渗硅法
