您要查找的是不是：
- A thin skin or film, such as an organic membrane or a liquid film. 薄皮，薄膜如生物膜或液体膜等细薄的皮或膜
- liquid film technology 液膜技术
- Video, too, can be thought of as usurping film technology. 录影也是一样，可视为篡夺电影的技术。
- A thin skin or film,such as an organic membrane or a liquid film. 薄皮，薄膜如生物膜或液体膜等细薄的皮或膜。
- The technique of Squeeze Liquid Film Damping is adopted in precise boring. 在精镗孔加工中采用挤压液膜阻尼技术。
- R. W. Berry, P. M. Hall and M. T. Harris, “Thin Film Technology”, van Nostrand Reinhold, 1980, 201. 王宏灼，”反应性射频溅镀法成长氮化铝薄膜之研究”，国立中山大学电机工程研究所硕士论文，(1995)。
- R.W.Berry, P.M.Hall and M.T.Harris, “Thin Film Technology”, van Nostrand Reinhold, (1980)201. 郑建铨，”质子交换铌酸锂与射频溅镀氮化铝薄膜之表面声波特性研究”，中山大学电机工程研究所博士论文，(1996)。
- R.W.Berry, P.M.Hall, and M.T.Harris, “Thin Film Technology”, D.Van Nostrand CO., INC., Princeton, N.J., p 706, 1968. 蔡家龙，“制程参数对溅射沈积氮化铝薄膜之影响”，国立中山大学电机工程研究所硕士论文，(2000)。
- Liquid film method was researched to recover naphthalene sulfonate from T-acid mother liquor. 采用液膜法回收T酸母液废水中的奈磺酸盐。
- Metal pairs are adhesive together due to asperity peaks penetrating the liquid film. 此时,存在表面微突体的磨损和表面损伤。
- R. W. Berry, P. M. Hall and M. T. Harris, “Thin Film Technology”, Van Nostrand Reinhold, pp. 201, 1980. 王宏灼，“反应性射频溅镀法成长氮化铝薄膜之研究”，国立中山大学电机工程研究所，硕士论文，1995。
- But in February 2008, Polaroid as a film technology succumbed to an inevitable fate. 但是在2008年二月，身为软片技术公司的宝丽莱屈服于一个不可避免的命运。
- The factors affecting the mechanical properties of zein films, such as film-forming liquid components, filming technology and storage conditions, were described. 影响玉米醇溶蛋白膜机械性能的主要因素有成膜液中各组分性质、制膜工艺及贮藏条件等。
- Based on the low Reynold number and small flux model, the velocity and thickness of the liquid film outside the horizontal tube were studied. 采用低雷诺数、小流量模型对黏性流体在水平管外形成的薄液膜的流速以及膜厚分布进行分析和计算 ;
- Foam consists of bubbles, which are very thin liquid films with air inside. 水花含有气泡,气泡其实是外面一片很薄的液体,内里包著空气。
- As an expert in surface coating and pressure sensitive adhesive film technology,Brady is dedicated to provideing integrated solutions for customers. 作为全球表面涂层和压敏胶膜技术的专家、贝迪致力于向客户提供集成解决方案。
- Leakage flow rate,liquid film axial stiffness and the ratio of film stiffness to leakage rate of such a seal were compu... 密封环的约束对变形起着重要作用,选择合适的约束可以减小密封面转角,提高液膜刚度,增强密封工作稳定性。
- It is found that the entraining water flux decreases at first, reaches a minimum, and then increases with the increase of the liquid film velocity. 在两管间隙和气流速度一定的条件下，液膜流速对气流的带液量也存在影响，随着液膜流速的增大带液量先减少后增加。
- There is a particular focus on aesthetic problems about appearance and reality, literary and visual effects, communication and alienation through film technology. 我们会特别聚焦于几个美学的问题：表象与现实，文学与视觉效果，藉由电影技术达成的沟通与异化。
- In this paper, the operating feature, distribution of gas and forming mechnism of liquid film of Falling film multitubular tower are discussed. 介绍了降膜式多管湿壁塔的操作特点,气体分布和液体成膜的机理。
