该词条未找到_海词词典

您要查找的是不是：

The limited element analysis about the relative sedimentation of foundations, the influence of ratio of length and height , foundations rigidity , groundsill rigidity on the inner stress in wall;4. 3．有限元分析地基相对沉降量墙体开裂规律及墙体长高比、地基刚度、基础刚度对墙体内部应力的影响；
Limited Element Analysis of Link Rod Machinery of Entitative Matrix 计量泵连杆机构的有限元分析
Limited element analysis in esries design of portal crane 门式起重机系列设计中的有限元分析
"Double Node Spring Element" in Bridge Structure Limited Element Analysis 桥梁结构有限元分析中的"双结点弹簧单元"
Keywords joint between ellipse head and cylinder;uncontinuous stress;limited element analysis; 椭圆封头与筒体连接处;不连续应力;有限元分析;
Finite element analysis for complex structure. 复杂结构有限元分析。
Using the finite element analysis software MSC. 摘要采用有限元分析软件MSC.
limited element analysis 有限元分析
This paper discusses the plastic limit load of elbows with local thinn ed area under internal pressure.Fnite element analysis (FEA) and experiments ha ve been used. 采用有限元分析法和试验测定法,对内压作用下局部减薄弯管的极限载荷进行研究。
Nonlinear Finite Element Analysis of Reinforced Concrete Transferring Joints. 数字化期刊。钢筋混凝土斜柱转换节点的非线性有限元分析。
It was characterized by Element analysis, SEM, XRD and UV-Vis spectrum. 通过元素分析,SEM,XRD,紫外可见光谱对所合成的催化剂进行了结构分析。
The regularity of random error of trace element analysis is discussed. 本文讨论了痕量元素分析中随机误差的规律性。
The distortion process of the rock bedded slope with weak structure surface is analyzed by RFPA-slope limited element procedure. 使用RFPA边坡版有限元分析程序分析含软弱结构面的顺层岩质边坡的变形破坏情况。
In the flatform,finite element analysis is done on compressor valve plate. 在此平台上,对压缩机阀板进行了有限元分析。
Keywords : deep pit, spatial finite element analysis, failure model. 关键词深基坑，三维有限元分析，破坏模式；
By means of the nonlinear finite element analysis commercial code, MSC. 摘要利用三维非线性有限元分析软件-MSC.
The finite element analysis of reel structure of aut omobile crane is studied. 对汽车起重机卷筒结构的有限元分析方法进行了研究。
The paper discusses the plastic limit pressure of elbows with local thinned area on inner wall of extrados.In this research, finite element analysis (FEA) has been used. 摘要采用有限元分析法对内压作用下外拱内壁局部减薄弯管的极限载荷进行研究。
The two products are characterized by IR, MS and elements analysis. 产物由IR、MS和元素分析鉴定了其结构。
This paper discusses the plastic limit load of elbows with local thinned area under internal pressure.Fnite element analysis (FEA) and experiments have been used. 摘要采用有限元分析法和试验测定法，对内压作用下局部减薄弯管的极限载荷进行研究。