您要查找的是不是：
- laser gyro axis 激光陀螺轴
- The random error is the main error of laser gyro. 随机误差是激光陀螺的主要误差。
- DDC112 is applied in the cavity length control system of laser gyro. 介绍了DDC112在激光陀螺的腔长控制系统中的应用。
- Temperature is one of the most important elements that affect the precision of ring laser gyro (RLG). 摘要针对激光陀螺的零偏受温度影响较大，为提高陀螺精度，研究了二频机抖激光陀螺抖动频率与温度之间的关系。
- Techniques borrowed from the ring laser gyro can be adapted to fluid flow measurement. 借环形激光陀螺仪的技术，加以改进使之适用于流体流量的测量。
- Thermal effects impose the greatest limit on the precision of a ring laser gyro (RLG). 温度是制约提高陀螺精度的重要因素。
- Temperature is one of the most important elements that affect the precision of ring laser gyro(RLG). 针对激光陀螺的零偏受温度影响较大,为提高陀螺精度,研究了二频机抖激光陀螺抖动频率与温度之间的关系。
- Error Analysis and Simulation of Ring Laser Gyro Strapdown Inertial Navigation System[J]. 引用该论文 吉翠萍;陈勇;雷宏杰;韩宗虎;陈林峰.
- The main features of C8051F120 MCU and it's application in the Laser Gyro Controller are introduced. 介绍了C8051F120单片机的主要性能特点及其在激光陀螺稳频控制器中的应用。
- Langmuir Flow Effects in Ring Laser Gyros[J]. 引用该论文 袁晓东;高伯龙;曾明;张斌.
- Waveform in lock-in area of mechanically dithered ring laser gyro (RLG) and output of the old phase demodulator were analyzed by computer simulation. 利用计算机仿真分析了机械抖动激光陀螺过锁区的各种可能波形及原有鉴相方法相应的鉴相结果，从中发现了原鉴相方法存在的问题。
- To eliminate dynamic lock-in error of dithered ring laser gyro,it is desirable to inject a pseudo-random noise into the dither. 向抖动中注入高斯概率密度的随机噪声，以消除抖动偏频激光陀螺的动态闭锁误差。
- To three-axis laser SINS,besides the conning motion introduced by carrier,there are conning motion introduced by dithering of three-axis laser gyro. 对三轴机抖激光陀螺捷联惯导系统,除了弹体运动可能引入圆锥运动外,三轴机抖激光陀螺产生的机械抖动也会在惯导系统中引入圆锥运动。
- The mechanical dithering of ring laser gyro (RLG) brings pseudo coning motion for strapdown inertial navigation system (SINS) with dithered RLG. 摘要对于机抖激光陀螺捷联惯导系统，激光陀螺的机械抖动偏频引入伪圆锥运动。
- A theoretical study of the mode difference between the left and right elliptically polarized light in the differential laser gyro is presented. 理论分析了四频差动激光陀螺中左、右旋椭圆偏振模式的非对称性。
- This paper describes random error sources, and introduces the method of Allan variance and its application at characterizing the performance of a Ring Laser Gyro(RLG). 本文讨论了环形激光陀螺（RLG）的随机噪声及其产生机理，并介绍了国外常用的用于评估RLG和其它精密测量仪器性能的Alan方差法，最后，应用Alan方差法来分析某型号环形激光陀螺的误差特性。
- A new calibration technique was proposed for strapdown inertial measurement unit according to simplified model of ring laser gyro(RLG) and quartz accelerometer. 根据激光陀螺和石英加速度计的简化输出模型,推导并提出了一种新的激光陀螺惯性测量组合标定方法。
- The new circuit directly digitizes the photocurrent of laser gyro successfully, and meets the need of high precision cavity length control system of laser gyro. 用设计的新电路实现了激光陀螺光电流的直接数字化，满足高精度腔长控制的要求。
- A time sequence model of laser gyro random error is set up,model parameter is estimated with RLS algorithm,and random drift data are processed by Kalman filter base on the model. 采用时间序列分析方法建立激光陀螺随机误差模型,应用递推最小二乘(RLS)法估计模型的参数,在此基础上对激光陀螺的漂移数据进行了卡尔曼滤波,结果表明:该方法能有效地抑制激光陀螺的随机误差,提高了激光陀螺的精度。
- The kalman filter is designed based on the time sequence model of drift data of laser gyro and used to filter the drift data of laser gyro. The method of Allan variance is used to analyze the results of filtering. 设计了基于激光陀螺漂移数据时间序列模型的卡尔曼滤波器，对激光陀螺漂移数据进行了滤波，并采用Allan方差法分析了滤波结果；
