您要查找的是不是：
- internal friction of rotor 转子内摩擦
- Influence of pile spacing, pile cap dimension and angle of internal friction of embankment filling on the pile efficacy is analyzed. 研究了桩间距、桩帽大小和填料内摩擦角对桩体荷载分担比的影响。
- The test results show that the compression modulus,modulus of resilience,cohesion and angle of internal friction of the compaction loess increase with the compactive effort. 试验结果表明:压实黄土的压缩模量、回弹模量、粘聚力及内摩擦角随击实功的增大而增大;强夯压实黄土的干密度普遍较击实黄土低,但其压缩模量和强度较室内击实黄土明显地大。
- Feature Extraction From the Locus of the Internal Friction of a Rotor 旋转构件中内摩擦轨迹特征提取
- INTERNAL FRICTION OF Ag-Cd ALLOY IN THE BAINITIC TRANSFORMATION Ag-Cd合金贝氏体相变内耗
- Numerical Simulation of Rotor Flow in Hover. 悬停下旋翼流的数值模拟。
- Experimental Study of Internal Friction of a-Si:H Films Charged with Hydrogen 氢化非晶态硅薄膜的渗氢内耗实验研究
- The friction of cotton increases with increasing regain. 棉纤维的摩擦力随回潮率的增加而增加。
- Measurement to Internal Friction of Die Cast Magnesium Ally and Research on its Mechanism 压铸镁合金材料内耗值的测量与减振机理
- All internal friction harmful to the War of Resistance must be sternly checked. 任何不利于抗战的内部磨擦，都必须用严正的态度加以制止。
- On the basis of the basic dynamic theory a mathematical model of rotor systems in which the sliding friction exists between rotor and stator is proposed. 摘要本文用动力学基本理论建立了转子和定子之间有干摩擦的转子系统动态特性分析的数学模型。
- A new way to solve dynamical response of rotor blade in helicopter. 提出了一种全新的计算旋翼桨叶动力响应的方法。
- The friction of cotton increases with increasing regair. 棉纤维的摩擦力随回潮率的增加而增加。
- A granular materical designed for maximum stability should pocess high internal friction to resist deformation under load. 为得到最大的稳定性而设计的颗粒材料应具有高内摩擦力而抵抗荷载下的变形。
- The affection of rotor speed's change on the mixing process in two,three and six nogs synchronous rotor internal mixers were analyzed and studied. 密炼机转子转速是密炼机重要参数之一,它直接影响到密炼机的生产能力、功率消耗和炼胶质量。
- The down side to this is that engines of greater displacement have larger internal friction surfaces inside and that robs power. 这的向下边是更大的替代的那发动机有更大的内摩擦在里面的表面和那抢劫能力。
- Study on Modeling of Rotor Thermal Stress with Varying Coefficients. 汽轮机转子热应力自适应模型研究。
- The effect of blade bowing on the inlet condition of rotor was also studied. 以及尾迹形状与扩散过程的变化对动叶进口条件的改变；
- A granular material designed for maximum stability should possess high internal friction to resist deformation under load. 为得到最大的稳定性而设计的颗粒材料应具有高内摩擦力而抵抗荷载下的变形。
- The viscoelasticity-anelasticity transition in the Zn-Al eutectoid alloy is investigated by measuring the internal friction(IF). 摘要文章通过内耗的测量研究了锌铝共析合金中黏弹性-滞弹性的转变；
