该词条未找到_海词词典

您要查找的是不是：

The default maximum hop count is 15. 默认最大跃点计数为15。
Destination is known as the hop count. 在不同的目的去决定跳数。
Hop count is used as the metric for path selection. 跳跃数被用来当作路径选择的权值。
Cause: The maximum hop count was exceeded for this message. 原因:此邮件超出了最大跃点计数。
Increase the hop count on the appropriate SMTP virtual servers. 增加相应SMTP虚拟服务器上的跃点计数。
Unable to deliver message because the maximum hop count was exceeded. 无法传递邮件,因为超出了最大跃点计数。
The hop count to use depends on the organization's Exchange topology. 要使用的跃点计数取决于组织的Exchange拓扑。
In the Advanced Delivery dialog box, type a new value in the Maximum hop count box. 在“高级传递”对话框中,在“最大跃点计数”框中键入新的值。
The default maximum hop count for SMTP virtual servers in Exchange Server 2003 is 30. 在Exchange Server 2003中,SMTP虚拟服务器的最大默认跃点计数是30。
Solution: The maximum hop count is a property set on each virtual server and you can manually override it. 解决方法:最大跃点计数是在每个虚拟服务器上设置的属性,可以手动覆盖它。
This event is logged when a non-delivery report is generated because a message exceeded the maximum hop count. 在由于邮件超出了最大跃点计数而生成未送达报告时,会将此事件记入日志。
The hop count for an SMTP Virtual Server in Exchange 2000 can be configured to be between 10 and 256. 可以将Exchange 2000中的SMTP虚拟服务器跃点数配置为从10到256范围内的某个数字。
The IP address in the Received: header field is used for hop count and routing loop detection. Received:头字段中的IP地址用于跃点计数和路由循环检测。
Using the method of combining hop count and ETX can avoid routing cycle and build up the network topology quickly. 另外,将跳数与ETX尺度相结合,避免了路由循环,能够快速建立网络拓扑。
RIP selects a path to a network by adding one to the hop count reported by a neighbor. RIP以由邻居报告的跳跃计数加一方式来选择一条通往网路的路径。
Whether the actual path includes a circular routing path or too many hops, the packet will eventually exceed the maximum hop count. 假如实际的路径包括循环的绕送路径或太多的跳跃，封包最后将超过最大跳跃数。
Each router that the packet encounters along the way is called a hop. The hop count is the distanced traveled. 沿著此径封包进入的每个路由器被称为一个跳跃,跳跃数是行经的距离;
This composite metric is more accurate than the hop count metric that RIP uses to choose a path to a destination. 这合成的权值比RIP用来选择到目的地路径的跳跃数权值更为准确。
For example, RIP v1 uses hop count as the only factor to determine the metric of a route. 例如，RIPv1使用跳跃数当决定路由权值的唯一因素。
If the hop count on the message exceeds the MAXIMUM HOP COUNT set for the particular SMTP Virtual Server, the message is rejected. 如果邮件上的跃点数超过了特定SMTP虚拟服务器上设置的“最大跃点计数”,则该邮件将被拒绝。