该词条未找到_海词词典

您要查找的是不是：

The as-deposited high silicon electrical steel was processed using high temperature rapid annealing process. 对电子束物理气相沉积高硅硅钢片进行了高温快速退火处理。
Adoption of the technology for high silicon Si-Mn realizes saving energy, no pollution and excellent quality. 应用该工艺生产高硅锰硅节能、无污染、产品质量好。
The influence of austempering treatment on the microstructure, retained austenite and fracture toughness of high silicon cast steel has been studied. 研究了在不同等温淬火温度热处理后高硅铸钢的显微组织与残余奥氏体量和材料断裂韧性间的关系。
The effect of high silicon low iron material on softening temperature, balling index, quality and output of sintering ore was investigated. 摘要分析了高硅低铁物料对铅锌矿软化温度、成球性指数、烧结矿质量与产量的影响。
Reportedly, may be higher silicon content in beverages. 据称，可能是饮料中硅含量较高。
Graphite anode or Duriron anode ( high silicon castiron anode ) is more often used in deep well ground bed for cathodic protection, but they have some shortcomings. 摘要阴极保护系统在采用深井作为阳极地床时，以往使用较多的是石、墨阳极或高硅铸铁阳极，但其存在很多弊端。
Liu YC, Lu YL, Yang GC, Zhu ZG. Influence of cerium content on damping capacities of as-spray deposited high silicon alloy ZA27, Transactions of NFsoc 7 (1997) 111-115. 杨留栓，刘永长，庞礼军，杨根仓，周尧和.;喷雾沉积高硅ZA27合金的摩擦磨损性能，材料研究学报，10（1996）363-367
Graphite anode or Duriron anode(high silicon castiron anode) is more often used in deep well ground bed for cathodic protection,but they have some shortcomings. 阴极保护系统在采用深井作为阳极地床时,以往使用较多的是石墨阳极或高硅铸铁阳极,但其存在很多弊端。
Yang LS, Liu YC, Yang GC, Zhou YH. Friction-wear property of high silicon ZA27 alloy prepared by spray deposition, Transactions of NFsoc 6 (1996) 105-109. 杨留栓，庞礼军，刘永长，杨根仓，周尧和.;喷雾沉积ZA27合金微滴热过程物理模型与数值分析，粉末冶金技术，13（1995）163-169
Xi‘an Changfeng is one of the few companies in China which recycles alumina waste to produce high silicon aluminium using its proprietary electrolytic technology. 西安长发是中国为数不多的铝废品回收公司之一，它应用其专有的电解技术生产出优质再生铝硅合金产品。
It introduces the production control of low phosphorus and low carbon high silicon silicomanganese and the measures and crafts requirement of decreasing phosphorus and carbon. 论述了低磷低碳高硅锰硅合金的生产控制和降磷降碳措施以及工艺要求。
The performance of C5/C6 isomerization catalysts prepared by the high silicon mordenitesis equals or exceeds the industrial catalyst by modified low silicon mordenite. 以直接合成的高硅丝光沸石制备的C5/C6异构化催化剂的性能达到或超过了由低硅丝光沸石改制的催化剂。
The carbon content of bainitic ferrite in the austempered high silicon cast steel after various austempering combinations is investigated by XRD method. 湿法处理低品位高硅氧化锌矿，主要的研究对象是浸出后料浆的过滤性能问题。
The volume fraction and carbon content of retained austenite in the austempered high silicon cast steel after various austempering combinations were investigated by XRD method. 采用X射线衍射对高硅铸钢等温淬火热处理后的残余奥氏体量以及残余奥氏体含碳量进行了测定。
Structure and corrosion behavior of the high silicon cast iron in several different environments have been tested by means of weight-loss analysis and metallograph. 采用失重分析、金相分析等试验方法研究了高硅铸铁在不同环境下的耐腐蚀性能,并对高硅铸铁、普通灰铸铁及白口铸铁的耐腐蚀性进行比较。
Liu YC, Yang GC, Lu YL, Zhu ZG. Influence of extrusion on damping capacities of as-spray deposited high silicon alloy ZA27 modified by cerium, Acta metallurgica sinica 10 (1997) 437-444. 刘永长，杨根仓，吕衣礼.;喷雾共沉积法制备高性能金属基复合材料的新思路，材料导报，5（1996）65-67
Using the orthogonal experiment design, this article studied systematically the effects of Copper, Vanadium, Rear Earth-calcium-barium and melting technology on mechanical properties of high silicon acid-proof cast iron. 本文采用正交试验方法系统地研究了铜、钒、稀土钙钡和熔炼工艺对高硅耐酸铸铁机械性能的影响。
In welding the high silicon austenitic stainless steel 00Cr20-Ni24Si4Nb, a concentrated nitric acid corrosion resistant steel recently developed in Chana, a problem of achieving satisfactory bend plasticity of welded joints was encountered. 高硅奥氏体不锈钢00Cr20Ni24Si4Nb,是我国最新研究的耐浓硝腐蚀的新钢种。
In this paper,the preparation technology of high silicon polysilicon aluminium sulfate(HSPSAS) was introduced.The method of orthogonal design was used and the optimum parameters were acquired. 使用正交试验法分析了高硅聚硅铝(HSPSAS)絮凝剂的制备工艺,并确定了最佳制备工艺条件。
Abstract The high silicon cast aluminum alloy with copper content was hard anodized by DC overlapped pulse power supply.The effects of pulse amplitude on film properties were primarily investigated. 以直流叠加脉冲电源对含铜的高硅铸造铝合金进行硬质阳极氧化，研究了电源脉冲幅度对膜层性能的影响。